RME Babyface Pro FS

USB-Audio-Interface

EUR 771.45

Incl. VAT, free shipping

Product #	210969
Brand	RME
Category	USB-Audio-Interface
Brand Category	RME - USB
Release date	May 2020
Availability	1 unit in stock

Shop	Availability
External Warehouse	Average delivery time: 4-14 days

Unit: 1 Stk.

Add to wishlist

24-Channel 192 kHz bus-powered USB Audio Interface

5.0 out of 5 | 1 review | Write a review

Description
Supplied items
Attributes
Properties
Reviews

Description

+19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations.
Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity.
3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms.
Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB.
6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...).
All the above improvements were achieved without raising the units power consumption.
K-slot for theft protection.

Supplied items

- Cable USB 2.0 A plug to right angle B plug, length 39” (1m)
- Cable USB 2.0 C plug to right angle B plug, length 39” (1m)
- MIDI breakout cable
- Carrying box
- Manual

Attributes

Key attributes

Audio Interface Type	USB
Total Inputs	4
Total Outputs	4
Midi In/Out	No

USB-Audio-Interface attributes

Mic Inputs	2
Line Inputs	2
Instrument/HiZ Inputs	2
Analog Outputs	2
Digital Inputs	SPdif , ADAT , Optical
Digital Outputs	ADAT , SPdif
+48V Phantom Power	Yes
Unit	1 Stk.

Product Details

Product Number	210969
Brand	RME
Category	USB-Audio-Interface
Brand Category	RME - USB
Relevancy rank	52 of 141
Date	Mai 2020

Properties

Input: XLR, electronically balanced
Input impedance balanced: 2 kOhm, 5.2 kOhm with PAD
Input impedance unbalanced: 1 kOhm, 2.6 kOhm with PAD
Signal to Noise ratio (SNR): 113,7 dB RMS unweighted, 117 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 18 Hz – 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 7 Hz – 45.8 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz – 88 kHz
With PAD active : -0.1 dB 8 Hz, -0.5 dB < 4 Hz, -1 dB < 3 Hz
THD: < -112 dB, < 0.00024 %
THD+N: < -108 dB, < 0.00035 %
THD @ 30 dB Gain: < -115 dB, < 0.00016 %
THD+N @ 30 dB Gain: < -100 dB, < 0.001 %
Channel separation: > 110 dB
Gain range: -11 dB up to +65 dB
Maximum input level XLR, Gain 0 dB: +8 dBu, PAD +19 dBu
Maximum input level XLR, Gain 65 dB: -57 dBu, PAD -46 dBu