Login with Facebook
Sie haben einen tollen Kundenservice!
Shure KSM141SL / KSM141
Malomembránový Mikrofon
EUR 594.85
Incl. VAT, free shipping
| Product # | 66720 |
| Brand | Shure |
| Category | Malomembránové Mikrofony | Brand Category | Shure - Malomembránové Mikrofony |
| Series | Shure KSM |
| Release date | January 2007 |
| Availability |  Will be ordered for you as quick as possible |
Description
he Shure KSM141 is a large diaphragm end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
Applications
Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
Applications
Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Attributes
Product Details
| ||||||||||||||
Dimension
|
Properties
Features:
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
- KSM141/SL with windscreen and carrying case, champagne finish
- KSM141/SL STPAIR with two KSM141 mics, two windscreens, one carrying case, champagne finish
Specification:
Cartridge Type:
Permanently Biased Condenser
Frequency Response:
20 to 20,000 Hz
Directional Polar Pattern:
Cardioid/Omnidirectional
Output Impedance:
150 ohms (actual)
Attenuation Switch:
0 dB,15 dB, or 25 dB attenuation
Low Frequency Response Switch:
Flat; -6 db/octave below 115 Hz;
-18 dB/octave below 80 Hz
Phantom Power:
48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
Current Drain:
4.65 mA typical at 48 Vdc
Common Mode Rejection:
>50 dB, 20 Hz to 20 kHz
Polarity:
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight:
20 mm (0.8 in.) diameter, 146 mm (5.75 in.) long;
156 grams (5.5 oz.)
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
-37 dBV/Pa
Selfnoise (typical, equivalent SPL; A-weighted, IEC 651)
14 dB
Maximum SPL:
5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
Output Clipping Level:
5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
Dynamic Range:
5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
Signal to Noise Ratio:
80 dB
*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
- Weight: 0.300kg
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
- KSM141/SL with windscreen and carrying case, champagne finish
- KSM141/SL STPAIR with two KSM141 mics, two windscreens, one carrying case, champagne finish
Specification:
Cartridge Type:
Permanently Biased Condenser
Frequency Response:
20 to 20,000 Hz
Directional Polar Pattern:
Cardioid/Omnidirectional
Output Impedance:
150 ohms (actual)
Attenuation Switch:
0 dB,15 dB, or 25 dB attenuation
Low Frequency Response Switch:
Flat; -6 db/octave below 115 Hz;
-18 dB/octave below 80 Hz
Phantom Power:
48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
Current Drain:
4.65 mA typical at 48 Vdc
Common Mode Rejection:
>50 dB, 20 Hz to 20 kHz
Polarity:
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight:
20 mm (0.8 in.) diameter, 146 mm (5.75 in.) long;
156 grams (5.5 oz.)
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
-37 dBV/Pa
Selfnoise (typical, equivalent SPL; A-weighted, IEC 651)
14 dB
Maximum SPL:
5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
Output Clipping Level:
5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
Dynamic Range:
5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
Signal to Noise Ratio:
80 dB
*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
- Weight: 0.300kg
Documents (5)
Set Product
This product is a part of the following sets:
Magazine
This product is featured in the following magazine articles::
Brand
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Shure KSM141SL / KSM141
#66720
Recommended accessories
Shure A53M
EUR 56.40
Related products
