Login with Facebook
(1)
Das nenn ich einen Service - danke
Shure SM86
Microfono a Condensatore
EUR 187.10
Incl. VAT. Free delivery in Belgium from EUR 200
| Product # | 66960 |
| Brand | Shure |
| Category | Microfoni a Condensatore | Brand Category | Shure - Kondensator |
| Series | Shure SM |
| Release date | October 2004 |
| Availability |  In stock |
| Shop | Availability |
|---|---|
| External Warehouse |
Average delivery time: 4-14 days |
Shipping cost: Shipping cost on demand
Description
he Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise. The SM86 is an excellent selection for use with both stage monitors and personal monitors.
SM86-LC without cable.
Condenser cartridge for studio quality sound, tailored frequency response for a clear reproduction of vocals. Rugged construction withstands the rigors of touring sound. Cardioid polar pattern minimizes unwanted background noise, excellent choice for stage monitors and personal in-ear monitors. Built-in three-point shock mount minimizes handling noise. Two-stage "pop" filter reduces wind and breath noise
SM86-LC without cable.
Condenser cartridge for studio quality sound, tailored frequency response for a clear reproduction of vocals. Rugged construction withstands the rigors of touring sound. Cardioid polar pattern minimizes unwanted background noise, excellent choice for stage monitors and personal in-ear monitors. Built-in three-point shock mount minimizes handling noise. Two-stage "pop" filter reduces wind and breath noise
Attributes
Product Details
| ||||||||||||||
Dimension
|
Properties
- Transducer Type: Condenser (electret bias)
- Frequency Response: 50 to 18,000 Hz
- Polar Pattern: Cardioid
- Output Impedance: 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms
- Sensitivity: (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
(1 Pa = 94 dB SPL)
- Output Clipping Level: 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
- Maximum SPL: (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB
- Self-Noise: 23 dB typical, A-weighted
- Dynamic Range: (1000 ohms) 124 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651) S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
- Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA
- Connector: Three-pin (XLR) professional audio
- Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
- Dimensions: See User Guide
- Net Weight: Net: 278 grams (9.8 oz)
- Environmental Conditions: Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%)
- Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)
- Weight: 0.430kg
- Frequency Response: 50 to 18,000 Hz
- Polar Pattern: Cardioid
- Output Impedance: 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms
- Sensitivity: (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
(1 Pa = 94 dB SPL)
- Output Clipping Level: 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
- Maximum SPL: (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB
- Self-Noise: 23 dB typical, A-weighted
- Dynamic Range: (1000 ohms) 124 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651) S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
- Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA
- Connector: Three-pin (XLR) professional audio
- Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
- Dimensions: See User Guide
- Net Weight: Net: 278 grams (9.8 oz)
- Environmental Conditions: Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%)
- Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)
- Weight: 0.430kg
Magazine
This product is featured in the following magazine articles::
Brand
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Shure SM86
#66960
Recommended accessories
Related products
