Shure Beta 56A

Features:

- Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
- Compact design reduces stage clutter
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Minimally affected by varying load impedance
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Legendary Shure quality and reliability

Specification:

Type
Dynamic (moving coil)

Frequency Response
50 to 16,000 Hz

NOTE: The curve below shows on­axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.

Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency

Output Level (at 1,000 Hz)
Open Circuit Voltage -51 dBV/Pa (2.8 mV)
(1 Pa = 94 dB SPL)

Impedance
Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z

Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Connector
Three-pin professional audio connector (male XLR type)

Case
Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille

Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread

Net Weight
468 grams (16.7 oz)

- Weight: 0.640kg