Walrus Audio Fundamental Series - Delay

- Time: Control the rate of the delayed repeats.
- Feedback: Control the number of repeats.
- Mix: Control the mix of the effect and the original clean signal. All the way to the left is fully clean, and all the way to the right is fully Delay.
- Slide Switch – The slide switch allows you to change between 3 distinct Delay algorithms.
- Digital – Add a clean rhythmic delay back into your signal.
- Analog – Add a filtered and slightly distorted delay back into your signal, designed to replicate the characteristics of bucket brigade delay chips.
- Reverse – Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload.
- Secondary Control: Control the tap division when tap mode is engaged.
- 1. Quarter Note
- 2. Dotted Eighth Note
- 3. Eighth Note
- Bypass Switch – Turns the effect on and off. Hold down to engage tap mode. Hold down again to disengage tap mode.
- Bypass LED - Illuminated when the effect is engaged, and will blink with tapped tempo when tap mode is engaged.
- Tap Mode: To enter tap mode, hold down bypass until you see the LED flashing. Once it is flashing, tap mode is engaged and the stomp switch will only work as a tap tempo until tap mode is disengaged. While tap mode is engaged, adjusting the program select toggle will only change the division of the tap control. To disengage tap mode, hold down bypass again until you see the LED turn back to solid white.
- Trails Modes – Hold down the stomp switch when applying power to the pedal. Trails mode is default.
- Input Jack - 1/4 inch cable from instrument.
- Output Jack - 1/4 inch cable to amplifier.
- 9v Jack – 9-volt DC, Center Negative, 100mA min

Für die Fundamental-Serie haben wir uns der Herausforderung gestellt, ein Pedalset mit der Klangqualität zu entwickeln, die für das Pedalboard eines Profis erforderlich ist, aber mit einer vereinfachten Steuerung, die selbst für die unerfahrensten Effektpedalbenutzer benutzerfreundlich genug ist. Jedes Fundamental-Pedal hat drei Schieberegler zum Anpassen des Klangs und einen Dreiwegeschalter zum Ändern der Pedalmodi. Das Ergebnis ist eine Reihe von 8 Pedalen, mit denen Sie von Ihrer ersten Bandprobe bis hin zu einer ausverkauften Arena alles haben. Entworfen und zusammengebaut im Hauptsitz von Walrus Audio in OKC, OK.