Audio-Technica PRO 70

- Miniature condenser microphone is ideal for both vocal and acoustic guitar applications - Natural and articulate vocal reproduction when used as a clip-on lavalier?clothing clip included - Excels in pickup of acoustic guitar with included instrument adapter - Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source - Switchable low-frequency roll-off - Corrosion-resistant contacts from gold-plated XLRM-type connector - Operates on battery or phantom power - 6' (1.8 m) cable permanently attached between microphone and power module TECHNICAL DATA TRANSDUCER ELEMENT Electret capacitor with permanently polarized capacitor Polar pattern cardioid Frequency response 100-14,000 Hz Bass roll-off 80 Hz, 8 dB/octave Open circuit sensitivity Phantom: -45 dB (5.6 mV) right 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa Impedance Phantom: 200 ohm Battery: 200 ohm Maximum input sound level Phantom: 123 dB SPL, 1 kHz, at 1% THD Battery: 123 dB SPL, 1 kHz, at 1% THD Dynamic range (typical) Phantom: 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL Signal-to-noise ratio 67 dB, 1 kHz at 1 Pa Phantom power 11-52V DC, 2 mA typical battery type 1.5V AA/UM3 Battery current/life 0.4 mA / 1200 hrs (typical) (Alkaline) Switch off, on-flat, on-roll-off Weight (microphone) 8 g Weight (power adapter) 134 g Dimensions ( Microphone) 25.0 mm long, 10.2 mm diameter Dimensions (AC adapter) 83.0 mm H x 63.0 mm W x 22.0 mm D Output connector 3-pin XLRM jacks Cable Fixed 1.8 m long cable between microphone and power adapter Supplied accessories AT8411 clip-on clip; AT8444 instrument adapter; power adapter; windscreen; Battery; Microphone case Audio-Technica Case Style M1

- Weight: 0.280kg