Disaster Area - MIDI Foot Controllers

Power supply: Requires 9-12V input, maximum 50 mA.

Status LED: Lights up blue when powered, flashes red when MIDI data is received.

- Dimensions: 51mm x 51mm x 27mm (excluding the socket nut).

MIDI Out - sends standard MIDI through a 5-pin connector.

MIDI input via Disaster Area MIDI Y-cable, forwards all incoming data. You can also send Baby 3 messages from your MIDI instrument to trigger its functions.

- Graphical OLED display shows preset names, device status, clock rate, and more.

- One MultiJack connector can function as Expression Pedal input, Tap Tempo Output, Function Switch Output, Footswitch Input, or MIDI Output.

- Internal DIP switches

Status LED: Lights up blue when powered, flashes red when MIDI data is received. Constant high-speed MIDI data such as MIDI clock can cause the LED to stay purple.

MIDI THRU: Dedicated hardware MIDI thru,

Sturdy cast aluminum enclosure

Enclosure Dimensions 4.8″ x 2.6″ x 1.4″

Soft-touch footswitches

Sturdy cast aluminum enclosure

Enclosure Dimensions 4.7″ x 3.7″ x 1.4″

Soft-touch footswitches

Sturdy cast aluminum enclosure

Enclosure Dimensions 7.4″ x 4.7″ x 1.2″

Soft-touch footswitches

Control up to four MIDI devices as well as any combination of Disaster Area pedalboard switching systems. With expression and roller configuration on the right. Robust cast aluminum housing

Stable housing made of cast aluminum

Dimensions 9.2 x 3.8 x 3.6 cm

1/4″ MultiJack works as an expression pedal input, foot switch input or MIDI output.

Blue LED display shows the tempo in beats per minute or milliseconds.

Two isolated, optical relay-fed speed outputs or function switching outputs.

A Multi-Jack connection can act as a tempo output, function switching output, control voltage output (0

Three true bypass effect loops with gold contact relays

Adjustable mute relay for click/pop suppression or audio mute

Standard 5-pin MIDI input and output for connection to other devices or controllers

MIDI output – sends standard MIDI over 5-pin.

9V DC – compatible with most pedalboard power supplies, 30mA minimum.

MultiJack – MIDI output

Sturdy cast aluminum enclosure

Enclosure Dimensions 10″ x 2.5″ x 2.0″

Soft-touch footswitches

Compact size – 10″ x 2.6″ x 2″ excluding switch caps and jacks.

No special power supply required – uses less than 120mA, 9V from a Pedal Power 2 or similar.

5 footswitches for preset selection or manual effects loop control.

Two isolated channel or remote switch outputs

Output A can act as a single TRS output

Instant access to switch settings

Robust housing made of cast aluminum

Dimensions: 25.4 x 6.4 x 5.1 cm

Soft-touch foot switch

-Soft-touch foot switch

-Optical switching technology requires less power and has a longer service life than relay-based switches

- User-switchable pull-up resistors