Login with Facebook
Ampeg SVT-3 PRO
Bass Head
CHF 1090.00
MSRP: CHF 1674.45
MSRP: CHF 1674.45
Free delivery (CH)
| Product # | 103505 |
| Brand | Ampeg |
| Category | Bass Heads | Brand Category | Ampeg - Bass Heads |
| Series | Ampeg Pro Ampeg Pro Verstärker |
| Release date | December 2011 |
| Availability |  In stock |
| Shop | Availability |
|---|---|
| External Warehouse | 
Average delivery time: 4-14 days |
Description
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. That's where the SVT-3PRO comes in. There's a reason this amp is a best seller-it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.
It's all about tone. The SVT-3PRO's Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices" for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if that's not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel" for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
It's all about tone. The SVT-3PRO's Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices" for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if that's not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel" for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
Attributes
Product Dimensions
| ||||||||||||||||
Product Details
| ||||||||||||||||
Dimension
|
Properties
- Record and reamp with the powerful and modern sound variant of the legendary SVT bass amplifier
- Fine-tune your sounds using the built-in FX rack with noise gate, tone control and an on/off switch for the tweeter horn
- Shape bass sounds using the five selectable frequencies of the mid control and the 9-band graphic equalizer
- Immediate access to 26 different recording chains based on combinations of different microphones, loudspeakers and studio peripherals
Tube Drive Control
- 1/4" and Neutrik Speakon Outputs
- Input Peak LED
- Input Pad and Bright Switch
- Mute Switch and Tuner Out
RMS Power Output (8 Ohms): 275-Watts
- RMS Power Output (4 Ohms): 450-Watts
- Preamp: Tubes (3 x 12AX7)
- Driver Tubes: 1 x 12AX7, 1 x 12AU7
- Power Amp: Solid-State
- Tone Controls: 3-Band
- Mid Tone Control: 5-Position
- Graphic EQ: Yes, 9-Band
- Ultra Low/High Boosts: Yes
- Balanced Line Out: Yes, Pre/Post with Ground Lift and Level
- Effects Loop: Yes
- Preamp Out/Power Amp In: Yes
- Weight: 11.790kg
- Height: 580mm
- Width: 480mm
- Depth: 220mm
- Fine-tune your sounds using the built-in FX rack with noise gate, tone control and an on/off switch for the tweeter horn
- Shape bass sounds using the five selectable frequencies of the mid control and the 9-band graphic equalizer
- Immediate access to 26 different recording chains based on combinations of different microphones, loudspeakers and studio peripherals
Tube Drive Control
- 1/4" and Neutrik Speakon Outputs
- Input Peak LED
- Input Pad and Bright Switch
- Mute Switch and Tuner Out
RMS Power Output (8 Ohms): 275-Watts
- RMS Power Output (4 Ohms): 450-Watts
- Preamp: Tubes (3 x 12AX7)
- Driver Tubes: 1 x 12AX7, 1 x 12AU7
- Power Amp: Solid-State
- Tone Controls: 3-Band
- Mid Tone Control: 5-Position
- Graphic EQ: Yes, 9-Band
- Ultra Low/High Boosts: Yes
- Balanced Line Out: Yes, Pre/Post with Ground Lift and Level
- Effects Loop: Yes
- Preamp Out/Power Amp In: Yes
- Weight: 11.790kg
- Height: 580mm
- Width: 480mm
- Depth: 220mm
Specifications
Output Power Rating:
450 watts rms @ 4 ohms, 3% THD
275 watts rms @ 8 ohms, 3% THD
Signal to Noise Ratio:
80 dB (20 Hz–30 kHz), ref: 1% THD+N into a
4 ohm load with –20 dB stimulus (“normal”)
Maximum Gain:
63 dB @ 1 kHz, tone controls centered
Tube Complement:
12AX7 (4), 12AU7 (1)
Tone Controls:
Bass: +12 / –12 dB @ 50 Hz
Midrange: +15 / –15 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +14 / –19 dB @ 5 kHz
Graphic EQ Level +10 / –10 dB
Graphic EQ Range:
33 Hz: +15 / –15 dB
80 Hz: +8 / –8 dB
150 Hz: +8 / –8 dB
300 Hz: +8 / –8 dB
600 Hz: +8 / –8 dB
900 Hz: +8 / –8 dB
2 kHz: +8 / –8 dB
5 kHz: +9 / –9 dB
8 kHz: +10 / –10 dB
Bright Switch +6 dB @ 2 kHz
Ultra Hi Switch +6 dB @ 5 kHz
Ultra Lo Switch +2.5 dB @ 50 Hz
–12 dB @ 560 Hz
+1.5 dB @ 5 kHz
Footswitch Jack:
Graphic EQ On/Off, Mute On/Off [Tip = Mute, Ring = EQ]
Power Requirements:
~100–120 VAC, 50–60 Hz, 390 W [Domestic]
~200–240 VAC, 50–60 Hz, 390 W [Export]
450 watts rms @ 4 ohms, 3% THD
275 watts rms @ 8 ohms, 3% THD
Signal to Noise Ratio:
80 dB (20 Hz–30 kHz), ref: 1% THD+N into a
4 ohm load with –20 dB stimulus (“normal”)
Maximum Gain:
63 dB @ 1 kHz, tone controls centered
Tube Complement:
12AX7 (4), 12AU7 (1)
Tone Controls:
Bass: +12 / –12 dB @ 50 Hz
Midrange: +15 / –15 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +14 / –19 dB @ 5 kHz
Graphic EQ Level +10 / –10 dB
Graphic EQ Range:
33 Hz: +15 / –15 dB
80 Hz: +8 / –8 dB
150 Hz: +8 / –8 dB
300 Hz: +8 / –8 dB
600 Hz: +8 / –8 dB
900 Hz: +8 / –8 dB
2 kHz: +8 / –8 dB
5 kHz: +9 / –9 dB
8 kHz: +10 / –10 dB
Bright Switch +6 dB @ 2 kHz
Ultra Hi Switch +6 dB @ 5 kHz
Ultra Lo Switch +2.5 dB @ 50 Hz
–12 dB @ 560 Hz
+1.5 dB @ 5 kHz
Footswitch Jack:
Graphic EQ On/Off, Mute On/Off [Tip = Mute, Ring = EQ]
Power Requirements:
~100–120 VAC, 50–60 Hz, 390 W [Domestic]
~200–240 VAC, 50–60 Hz, 390 W [Export]
Series Info
The Pro Series delivers the power and tone required by today's modern bass players. Pro Series heads feature tube preamps and expanded EQ capability. Enclosures reproduce the entire tonal spectrum for true high-fidelity sound.
Documents (1)
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Ampeg SVT-3 PRO
#103505
Related products
