Sennheiser XSW IEM EK B-Band / Bodypack Stereo Receiver (572-596 MHz)

XSW IEM EK Stereo Receiver
IE 4 In-ear headphones
2 AA batteries
Quick Guide
Safety Guide
Compliance Sheet
Frequency Table

- UHF bodypack receiver to expand existing XS Wireless IEM setups
- Lightweight bodypack with rear clamp and stage-proof control panel
- Standard 3.5 mm jack plug for supplied IE 4 headphones or optional in-ear sets
- Backlit front panel and status LED for battery and link status
- Menu access to receiver sound settings like focus modes, volume control, limiter, and EQ
- Pan control for individual balance of the input channels
- Operates with 2x AA primary cells or rechargeable batteries

- Weight: 0.270kg
- Height: 33mm
- Width: 185mm
- Depth: 125mm

XSW IEM EK - Stereo Receiver:
RF characteristics:
- Modulation Wideband FM Frequency range B: 572-596 MHz (30 mW)
- Switching bandwidth up to 24 MHz
- Nominal/peak deviation ±15 kHz / ±24 kHz
- Squelch 10 μV, fixed
- AF characteristics
- Signal-to-noise ratio
- (1 mV, peak deviation)
- ≥88 dB
- Total harmonic distortion
- (THD)
- ≤ 1 %
- AF output level at 3.5 mm 2 x 1,25 Veff at 16 Ω
- High Boost (EQ) +10 dB at 13 kHz
- Limiter -10 dB
- AF frequency response 45 Hz to 15 kHz
- Cross talk (50 Hz - 10 kHz) typically 45 dB
- Overall device
- Temperature range 0 °C to +40 °C
- Power supply 2 AA batteries, 1.5 V
- Nominal voltage 3 V battery
- Operating time Approx. 6 hrs
- (depending on volume level)
- Dimensions Approx. 95 x 70 x 26 mm
- Weight (incl. batteries) Approx. 110 g
IE 4 - In-ear headphones:
- Transducer dynamic
- Frequency response 40-20.000 Hz
- SPL (1 kHz, 1 mW) 106 dB
- Nominal impedance 6 Ω
- Cable length 1.4 m
- Connector 3.5 mm (1/8“) stereo
- plug, gold-plated
- Temperature –5 °C (23 °F) to +50 °C
- (122 °F)

This product is a part of the following sets: