Behringer Spring Reverberation 646

Incl. power supply unit (12V DC2, 1.0A)

- Classic analog spring reverb effect from the ‘60s
- Authentic reproduction of original Grampian Reverberation Unit Type 646 circuitry
- Legendary vintage reverb sound from the king of spring reverbs, as heard on countless records
- Dual mechanical springs provide signal reflections for rich and dynamic room emulations
- Overload circuit for a warm analog overdrive of the signal before entering the spring reverb
- Total reverb decay time approx. 2 seconds
- Wet/dry mix control for adjusting the amount of reverberation effect
- Remote switch input for muting the reverb path
- Mic and line inputs with high/low line inputs for flexible routing
- Complete Eurorack solution – main module can be transferred to a standard Eurorack case

- Weight: 0.000kg
- Height: 87mm
- Width: 136mm
- Depth: 374mm

Inputs:
- Balanced Microphone x 2 (25 Ω 20 μv sensitivity)
- Unbalanced Microphone x 2 (25 Ω 20 μv sensitivity)
- High Level Auxilliary x 2 (1 MΩ 500 mv sensitivity)
- Low Level Auxilliary x 2 (50 kΩ 10 mv sensitivity)
- Outputs: Unbalanced line level x 2
Controls:
- Switches: Power (top panel)
- Knobs: Reverberate / Aux Channel / Mic Channel
- Sockets: Mute Footswitch x 2
- Frequency Response: ±2 dB 35 Hz - 20 kHz
- Reverberation Delay: 29 - 37 ms nominal
- Reverberation Time: 2 seconds at 300 Hz
- Reverberation Response: ±3 dB 100 Hz - 6 kHz
- Size: 37.37 x 13.56 x 8.64 cm / (14.71 x 5.34 x 3.40") / 72 hp when in Eurorack
- Weight: 1.58 kg (3.48 lb)
- Power Consumption: 1000 mA 12 V DC