LAB Gruppen FA1202

- 2 x 120 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Energy Star * certified design conserves energy and drastically reduces operational cost
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation

- Weight: 2.600kg
- Height: 44mm
- Width: 218mm
- Depth: 280mm

- Maximum Output Power (4 or 8 Ω per channel): 120 W
- Number of Ouput Channels: 2
Minimum Load Impedance:
- 4 Ω mode: 4 Ω
- 8 Ω mode: 8 Ω
- 70 V output mode: 41 Ω
- 100 V output mode: 82 Ω
Controls:
- Front: N/A
- Rear: Gain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter
Indicators:
- Power: On (blue), standby (yellow)
- Limit (red LED), per channel: Input clip, output limit
- Signal (green LED), per channel: >1.23 mV (-56 dBu)
- Fault (red LED): Overheat, DC fault, over current etc
System:
- Inputs: 2 x 3-pin 5.08 mm Euroblock connector
- Input sensitivty: Balanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV)
- Input Impedance: 10 kΩ unbalanced, 20 kΩ balanced
- Maximum input level: 9.75 V (+22 dBu)
- Outputs connectivity: 1 x 4-pin 5.08 mm Euroblock connector
- Output circuit type: Class D
- Remote connector: 2 x RJ45 Ethernet connector
Performance:
- Distortion,1/8 rated power: <0.5%
- Frequency response: 20 Hz to 20 kHz, +0/-1.5 dB
- Crosstalk: >65 dB
- Signal-to-noise: >100 dBA
- High-pass filter: 80 Hz HPF
Circuit Protection:
- Cooling: Convection-cooled, fanless
- Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
- Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse):
- Main voltage: 100-240 V~, 50/60 Hz with active power factor correction
- Power consumption 1/8th rated power @ 4 Ω: 70 W
- Mains connector: Standard IEC connector
- Dimensions (H x W x D): 44 x 218 x 280 mm (1.7 x 8.6 x 11")
- Weight: 2.6 kg (5.7 lbs)
- Finish: Brushed black anodized aluminum chassis with black painted steel bottom
- Approvals: CE, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0