Login with Facebook
The package has arrived thank you for your ongoing assistance throughout the
purchase and shipment. You and your team have been most helpful.
Shure KSM 137SL
Small Diaphragm Microphone
EUR 478.30
Incl. VAT, free shipping
| Product # | 66719 |
| Brand | Shure |
| Category | Small Diaphragm Microphones | Brand Category | Shure - Small Diaphragm Microphones |
| Series | Shure KSM |
| Release date | February 2007 |
| Availability |  In stock |
| Shop | Availability |
|---|---|
| External Warehouse |
Average delivery time: 4-14 days |
Description
The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
Applications
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
Applications
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Supplied items
1 - A100C Case
1 - A100WS Windscreen
1 - A57F Stand Adapter
Attributes
Product Details
| ||||||||||||||
Dimension
|
Properties
Features:
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
- KSM137/SL with foam windscreen and carrying case, champagne finish
- KSM137/SL STPAIR with two KSM137/SL Mics, two windscreens, one carrying case, champagne finish
Specification:
Cartridge Type:
Permanently Biased Condenser
Frequency Response:
20 to 20,000 Hz
Directional Polar Pattern:
Cardioid
Output Impedance:
150 ohms (actual)
Attenuation Switch:
0 dB,15 dB, or 25 dB attenuation
Low Frequency Response Switch
Flat; -6 db/octave below 115 Hz;
-18 dB/octave below 80 Hz
Phantom Power:
48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
Current Drain:
4.65 mA typical at 48 Vdc
Common Mode Rejection:
>50 dB, 20 Hz to 20 kHz
Polarity:
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight:
20 mm (0.8 in.) diameter, 122 mm (4.8 in.) long;
100 grams (3.5 oz.)
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
-37 dBV/Pa
Selfnoise (typical, equivalent SPL; A-weighted, IEC 651)
14 dB
Maximum SPL at 1 kHz
5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
Output Clipping Level*
5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
Dynamic Range
5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
Signal to Noise Ratio**
80 dB
*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise A-weighted.
- Weight: 0.250kg
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
- KSM137/SL with foam windscreen and carrying case, champagne finish
- KSM137/SL STPAIR with two KSM137/SL Mics, two windscreens, one carrying case, champagne finish
Specification:
Cartridge Type:
Permanently Biased Condenser
Frequency Response:
20 to 20,000 Hz
Directional Polar Pattern:
Cardioid
Output Impedance:
150 ohms (actual)
Attenuation Switch:
0 dB,15 dB, or 25 dB attenuation
Low Frequency Response Switch
Flat; -6 db/octave below 115 Hz;
-18 dB/octave below 80 Hz
Phantom Power:
48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
Current Drain:
4.65 mA typical at 48 Vdc
Common Mode Rejection:
>50 dB, 20 Hz to 20 kHz
Polarity:
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight:
20 mm (0.8 in.) diameter, 122 mm (4.8 in.) long;
100 grams (3.5 oz.)
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
-37 dBV/Pa
Selfnoise (typical, equivalent SPL; A-weighted, IEC 651)
14 dB
Maximum SPL at 1 kHz
5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
Output Clipping Level*
5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
Dynamic Range
5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
Signal to Noise Ratio**
80 dB
*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise A-weighted.
- Weight: 0.250kg
Documents (3)
Magazine
This product is featured in the following magazine articles::
Brand
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Shure KSM 137SL
#66719
Recommended accessories
Shure A53M
EUR 63.35
Related products
