Strymon Conduit MIDI box

- One opto-isolated 5-pin DIN MIDI interface (IN and OUT ports)
- Four 1/4″ TRS bi-directional MIDI ports
- Five MIDI status indicator LEDs
- One USB Type-C to USB-A Male cable
- Lightweight, compact anodized aluminum chassis with threaded mounting hardware
- Designed and built in the USA

- Weight: 0.140kg
- Height: 38mm
- Width: 90mm
- Depth: 72mm

Front Ins & Outs:

ACTIVITY LEDs - Activity LEDs will blink when MIDI information is present at a 1/4" jack.

STATUS LED for 5-pin DIN I/O - Status LED lights up GREEN to indicate Conduit is powered on and will flash AMBER when MIDI data is passing through Conduit to the 1/4" jacks.

POWER - Use an adapter with the following rating: 9VDC center negative, 50mA minimum. Power supply is not required when connected via USB.

DIN MIDI I/O Jacks - MIDI IN receives MIDI data from an external MIDI controller and sends the data to all four 1/4" jacks. All MIDI data sent back from 1/4" TRS connected pedals is merged and sent to the MIDI OUT.

SET BUTTON - Used for TRS MIDI I/O Jack configuration. The SET button can be pressed at any time to show configuration state of 1/4" TRS jacks.

USB-C - Used for computer connectivity. When USB is connected, the computer will recognize 6 MIDI I/O ports:

Conduit MIDI Ports 1-4 correspond with the 1/4" TRS jacks numbered 1-4.


Back Ins & Outs:

1/4" TRS MIDI I/O Jacks 1-4 - Out of the box, Conduit’s 1/4" TRS MIDI jacks are configured to work with Strymon pedals, with no further setup necessary. Each jack is capable of sending and receiving MIDI data, and can be configured to work with a variety of different 1/4" MIDI communication modes.