Behringer CM1A

- Converts MIDI signals to analog control voltages for modular synthesizers
- High-resolution 16-Bit Texas Instruments DAC for high resolution and pitch accuracy
- Enables modular synthesizers to be controlled by a MIDI keyboard, sequencer or DAW
- Dual trigger outputs can be used to control envelope generators
- Select between V-trigger, S-trigger or both for maximum flexibility
- Eurorack specs: 6 HP, 70 mA +12 V, 10 mA -12 V

- Weight: 0.090kg
- Height: 52mm
- Width: 30mm
- Depth: 129mm

- Outputs:
CV
Type: 2 x 3.5 mm TS jack, DC coupled
Impedance: 100 Ω
Max output level: -6.3 V to +10 V
CV range, System 100, 2500 series mode: -1 V to +9 V, 1 V/octave
CV range, System 15, 35, 55 mode: -5.3 V to +4.7 V, 1 V/octave
CV modes: Monophonic, duophonic
Trig
Type: 2 x 3.5 mm TS jack, DC coupled
Impedance: 25 Ω
Max output level: +5 V when in V-Trig mode,
S-Trig = pull down to 0 V
Trig modes: V-Trig, S-Trig, both: upper = S-Trig, lower = V-Trig
- MIDI:
Type
2 x 5-pin DIN
MIDI IN and MIDI THRU
MIDI Channel (1 to 16) set via SynthTribe tool
USB:
Type: USB 2.0, Type B
- Mode select (rear panel):
Mode 1, underside LEDs = red/red: System 15, 35, 55 CV range, monophonic
Mode 2, underside LEDs = green/red: System 100, 2500 series CV range, monophonic
Mode 3, underside LEDs = red/green: System 15, 35, 55 CV range, duophonic
Mode 4, underside LEDs = green/green: System 100, 2500 series CV range, duophonic
- Power:
Power supply: Eurorack
Current draw
0 mA (+12 V),
10 mA (-12 V)
Physical
Dimensions: 30 x 129x 520 mm
(1.18 x 5.08 x 20.47")
Rack units: 6 HP
Weight: 0.09 kg (0.19 lbs)