Close
Customer Feedback
Next
- claudine g. | 28.11.2025
Next
- karl-heinz k. | 19.09.2025
Next
- ulrich b. | 05.03.2025
Next
- barbara s. | 08.05.2025
Next
- michael h. | 29.10.2025
» » » » »

Behringer Multimode Filter / Resonator Module 1047

Voltage Controlled Filter
  • Behringer Multimode Filter / Resonator Module 1047
  • Behringer Multimode Filter / Resonator Module 1047
  • Behringer Multimode Filter / Resonator Module 1047
  • Behringer Multimode Filter / Resonator Module 1047
  • Behringer Multimode Filter / Resonator Module 1047
  • Behringer Multimode Filter / Resonator Module 1047
EUR 50.15
Add to wishlist
Legendary 2500 Series 12dB State Variable Filter Module for Eurorack

Classic-sounding 1047 analog multi-mode filter and resonator module from the '70s
Product Rating5.0 out of 5 | 1 review |   Write a review

Description

This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original “System 2500” circuitry from the 70’s that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.

The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Attributes

Haupt-Merkmale
Breite 16HP
Module Specifications
Tiefe 43mm
Funktion Filter
Case Specifications
Modulares Format Eurorack Modular (3HE)
Power Consumption
Information

Most Eurorack modules tend to only require the dual 12V rails (positive/negative), but some modules may need some amount of +5V current to function.

+5V rail 0mA
-12V rail 45mA
+12V rail 55mA
Produktabmessungen
Tiefe 129mm
Breite 81mm
Höhe 43mm
Allgemeine Informationen
Herstellerinformationen <strong>MUSIC Tribe Commercial BM Ltd. ROHQ</strong> <br/>25th Floor, Ayala Life - FGU Center, 6811 Ayala Avenue <br/>1209 Makati City <br/>Philippines <br/> <br/><a href="mailto:legal@musictribe.com" target="_blank" rel="noopener">legal@musictribe.com</a>
Voltage Controlled Filter Eigenschaften
Modulhöhe 3U
Panelfarbe Grau
Moduleigenschaften Aktiv
Produktdetails
Produktnummer 222760
Marke Behringer
Kategorie Voltage Controlled Filter
Marken-Kategorie Behringer - VCF
Relevanzrang 12 von 24
Datum Februar 2021
Produktmenge
Einheit 1 Stk.
Abmessungen
Gewicht 0.17kg
Tiefe der Box 154mm
Breite der Box 81mm
Höhe der Box 50mm

Properties

- Classic-sounding 1047 analog multi-mode filter and resonator module from the ‘70s
- Authentic reproduction of the circuitry from the “2500” Series
- Consists of a highly resonant 12 dB low-pass/high-pass and 6 dB band-pass filters capable of providing a wide variety of formant shaping and tonal modulation
- Filter simultaneously provides high-pass, band-pass, low-pass and notch outputs
- Coarse and fine controls adjust the cut-off frequency of all four filter outputs from 16 Hz to 16 kHz with 2 external control signal inputs and attenuators
- Resonance (Q) control adjusts the level of the resonant peak of the low-pass and high-pass filters and the band-pass filter Q from 0.5 to over 256 with an external control signal input and attenuator
- Resonance (Q) control also adjusts the notch filter Q and depth in addition to adding resonance
- Resonance limit switch can be used to prevent overload when high levels of resonance are required
- Notch freq/fc control allows the notch frequency to be offset above or below fc while simultaneously allowing resonant peaks at fc using the resonance (Q) control
- Input attenuator control allows you to optimize signal level and coloration
- Eurorack specs: 16 HP, 55 mA+12 V, 45 mA -12 V

- Weight: 0.170kg
- Height: 43mm
- Width: 81mm
- Depth: 129mm

Specifications

- Input Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: +18 dBu
Frequency CV input 1:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V/oct.
Frequency CV input 2:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V/oct.
Q CV input:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V doubles the Q factor
Outputs:
Filter outputs (LP / HP / BP / Notch):
- Type: 4 x 3.5 mm TS jack, DC coupled
- Impedance: 1 kΩ, unbalanced
- Max output level: +18 dBu
Controls:
- Coarse frequency: 1 x rotary knob, 31 Hz to 8 kHz
- Fine frequency: 1 x rotary knob, x1/2 to x2
- Resonance (Q): 1 rotary knob, Q = 0.5 to >256
- Resonance (Norm / lim): 2-way sliding switch Normal / limiting, switchable
- Frequency CV 1 / 2 attenuators: 2 x rotary knob, -∞ to unity gain
- Q CV attenuator: 1 x rotary knob, -∞ to unity gain
- Input attenuator: 1 x rotary knob, -∞ to unity gain
- Notch frequency/fc: 1 x rotary knob, ±3 octave range
- Power supply Current Draw: 55 mA (+12 V), 45 mA (-12 V)
- Dimensions: 43 x 81 x 129 mm (1.7 x 3.2 x 5.1")
- Rack units: 16 HP
- Weight: 0.17 kg (0.37 lbs)

Reviews (1)

Overall review:  Product Rating
[message:review-feature-name-operation]:  Product Rating
[message:review-feature-name-features]:  Product Rating
[message:review-feature-name-sound]:  Product Rating
Product Rating
1 customer
Product Rating
nobody
Product Rating
nobody
Product Rating
nobody
Product Rating
nobody
Overall review:  Product Rating
[message:review-feature-name-operation]:  Product Rating
[message:review-feature-name-features]:  Product Rating
[message:review-feature-name-sound]:  Product Rating
sehr gut klingendes Filter

Das 1047 ist ein sehr schön klingendes Filter, weich singend. Die Wertebereiche sind gut gewählt, es hat sich sofort sehr gut ins modulare Gefüge eingefügt. Obwohl ich das Original 1047-Filter nicht direkt kenne, vermute ich, dass die Originalschaltung recht gut getroffen wurde, einige Klänge haben mich sofort an ältere Aufnahmen bei denen das Original verwendet wurde, erinnert. Die Verarbeitung ist gut, die Potis haben einen angenehmen Widerstand und nichts wackelt.

Brand

Behringer wurde 1989 von dem Schweizer Ingenieur Uli Behringer gegründet. Der Musiker konnte die Produkte, die er suchte, nicht finden und beschloss daher, seine eigenen zu entwickeln. Derzeit umfasst die Produktpalette Synthesizer, Mischpulte, Audioschnittstellen, PA-Systeme, Verstärker und vieles mehr. as Unternehmen ist dafür bekannt, dass es erschwingliche und kostengünstige Alternativen zu vielen High-End-Marken für Audiogeräte anbietet. Dieser Ansatz hat dazu geführt, dass die Produkte des Unternehmens von Musikern, Aufnahmestudios, Toningenieuren und Musikliebhabern häufig verwendet werden.
Report incorrect data about this product
Quantity:-+
Customer Feedback
Next
- jan k. | 17.11.2025
Next
- ulrich b. | 05.03.2025
Next
- andré z. | 07.05.2025
Next
- levinzahnd | 22.04.2025
Next
- michael h. | 29.10.2025
Your Settings
Discount base: 1. Previous MusiX price, 2. Recommended list price