dbx 1215

The 1215V is a two-channel 2/3-Oktav-EQ with 45 mm faders on 2 U. All controls on the front panel are arranged clearly and logically. The frequency range is in accordance with ISO standard of 25 Hz - kHz. 16 The RF-filtered inputs and outputs are parallel to XLR, TRS and barrier strip balanced each run. the input gain control is used with the input level of + / - to adjust. 12 dB low cut filter acts as a Bessel 18 dB / octave at 40 Hz, this is controlled. The setting of the faders can be set from + / - 6 dB to + / - 15 dB switch. The output level is displayed by four LEDs. A Clip LED indicates clipping within the EQ. The signal ground jumper from the housing is separated by mass. In bypass, as well as in electricity aid want to relay the inputs to outputs.