Login with Facebook
RDL ST-DA3 Line Level Distribution Amplifier
Distribution Amplifier
EUR 420.35
Free delivery in Italy
| Product # | 214107 |
| Brand | RDL |
| Category | Distribution Amplifier | Brand Category | RDL - Distribution Amp |
| Release date | March 2020 |
| Availability |  Bude objednáno pro vás co nejrychleji |
1x3
Description
The RDL-ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The RDL-ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.
The RDL-ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
The RDL-ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
Attributes
General Information
| ||||||||||
Product Details
|
Properties
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
Specifications
Input: 20 kΩ balanced or unbalanced
Input Signal: -15 dBV to +21 dBu (for +4 dBu output)
Maximum Input Level: +24 dBu
Outputs (3): 150 Ω balanced or 75 Ω unbalanced
Output Signal:
Balanced: +4 dBu nominal balanced;
Unbalanced: 6 dB below balanced line level
Maximum Output Level: +25 dBu
Frequency Response: 10 Hz to 100 kHz (± 0.05 dB)
THD+N: < 0.002% (unity gain)
IMD: < 0.003% (unity gain)
Noise below +4 dBu: < -98 dB (unity gain)
Headroom: > 20 dB (above +4 dBu)
Gain: Unity ± 17 dB (adjustable)
CMRR: > 60 dB (50 Hz to 120 Hz)
Power Requirement: GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA
Package Type: Cardboard Box
Package Dimensions: 2 x 2 x 4 in.
Shipping Weight: 0.2 lbs.
WEEE weight: 0.145 lbs.
Tariff code: 8518.40.2000
Input Signal: -15 dBV to +21 dBu (for +4 dBu output)
Maximum Input Level: +24 dBu
Outputs (3): 150 Ω balanced or 75 Ω unbalanced
Output Signal:
Balanced: +4 dBu nominal balanced;
Unbalanced: 6 dB below balanced line level
Maximum Output Level: +25 dBu
Frequency Response: 10 Hz to 100 kHz (± 0.05 dB)
THD+N: < 0.002% (unity gain)
IMD: < 0.003% (unity gain)
Noise below +4 dBu: < -98 dB (unity gain)
Headroom: > 20 dB (above +4 dBu)
Gain: Unity ± 17 dB (adjustable)
CMRR: > 60 dB (50 Hz to 120 Hz)
Power Requirement: GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA
Package Type: Cardboard Box
Package Dimensions: 2 x 2 x 4 in.
Shipping Weight: 0.2 lbs.
WEEE weight: 0.145 lbs.
Tariff code: 8518.40.2000
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible