Herzlichen Dank für den tollen Service!
ART SPLITMix4
Signal Splitter/Combiner
EUR 82.50
Incl. VAT. Free delivery in Portugal from EUR 199
Product # | 144241 |
Brand | ART![]() |
Category | Signal Splitters/Combiners | Brand Category | ART - Splitters/Combiners |
Series | ART ARTcessories |
Release date | August 2010 |
Availability | ![]() |
Shop | Availability | Reserved |
---|---|---|
External Warehouse | ![]() | 5 pieces |
Unit: 1 Stk.
Product might be unavailable due to reservations in another locations.
Shipping cost: Shipping cost on demand
Description
The SPLITMix4 is a fully hybrid passive mixer that offers a wide variety of configurations. You can even configure the stereo input channels SPLITMix4 as 4 through 4 independent stereo output level attenuators to 4 channels. Independent stereo level controls are provided on each channel. All connections are 1/4-inch stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use. The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedance.
Attributes
Product Dimensions
| ||||||||||||||
Signal Splitter/Combiner attributes
| ||||||||||||||
Product Details
| ||||||||||||||
Dimension
|
Properties
- Four stereo input channels - Stereo Output - Independent stereo level controls are provided on each channel - Passive Design (No Power Supply Required) - over 90dB of attenuation Specifications: Frequency Response: 20Hz-20kHz, + /-1dB THD: <0.005% @ 1kHz (typical) Phase response: <10 degrees @ 20kHz Input / Output Connections: 1/4-inch stereo TRS Input Impedance: 25k-100k Ohms Output Impedance: 1k - 4k Ohms Insertion Loss: 12dB (typical) Maximum Attenuation:> 90dB (typical) Channel Isolation:> 90dB (typical) Power Requirements: None (fully passive) Dimensions (HxWxD in): 1.85 x 4.6 x 4.1 Dimensions (HxWxD mm): 47 x 117 x 104 Weight: 0.84 lbs / 0.38 kg
- Weight: 10.300kg
- Height: 117mm
- Width: 47mm
- Depth: 104mm
- Weight: 10.300kg
- Height: 117mm
- Width: 47mm
- Depth: 104mm
Reviews (1)

1 customer

nobody

nobody

nobody

nobody
Brand
Report incorrect data about this product