Shure SLXD4E / Digital Receiver (823-832 & 863-865 MHz)

- Rack Hardware
- 2x bulkhead adapters
- 2x BNC connectors
- 2x 1/4 wave antennas

- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction

- Hmotnost: 1.930kg

Housing: Galvanized Steel
Power Requirements: 15 VDC @ 600 mA
Supplied by external power supply (tip positive)

RF INPUT

Spurious Rejection: >75 dB Typical
Connector Type: BNC
Impedance: 50 Ω

AUDIO OUTPUT

Gain Adjustment Range: –18 to +42 dB in 1 dB steps Configuration:
1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio –)
Impedance:
1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
Full Scale Output:
1/4" (6.35 mm): +15 dBV differentially (+9 dBV single) XLR (LINE setting): +15 dBV
XLR (MIC setting): –15 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection:
1/4" (6.35 mm): Yes
XLR: Yes

NETWORKING

Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)