Přihláste se pomocí Facebooku
Wie bisher immer ein Superservice von Musix.
dbx Di1
Active Direct Injection Box
EUR 93.70
Incl. VAT. Free delivery in Czech Republic from EUR 398
| Produkt # | 187315 |
| Značka | dbx |
| Kategorie | Active Direct Injection Boxes | Brand Category | dbx - Active DI Boxes |
| Datum vydání | března 2017 |
| Dostupnost |  3 units in stock |
| Prodejna | Dostupnost |
|---|---|
| Externí Sklad |
Průměrná doručovací doba: 4-14 dnů |
Přepravní náklady: Přepravní náklady na vyžádání
Popis
Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone.
Built for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.
Recommended for: Studio, Tour, Portable.
Built for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.
Recommended for: Studio, Tour, Portable.
Atributy
Product Details
| ||||||||||||
Dimension
|
Vlastnosti
- Level and impedance matching function
- Output impedance: > 600 Ohms
- Signal pass through connector
- Output connector: XLR balanced
- Battery led indicator
- Distortion: (THD) < 0.005% at 1kHz, 0dBu
- Phantom power led indicator
- Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
- Output Noise: <-100dB unweighted
- TS and XLR inputs and outputs
- Frequency response: 10Hz to 70kHz, +0dB/-3dB
- Attenuation control
- Phantom Power: +18 volts DC to +48 volts DC
- Ground lift switch
- Main/Standby: 9V battery
- Input Impedance: >250k Ohm
- Metal Chassis
- Input Impedance > 250k Ohm
- Max Input +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
- Connectors Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced), 1/4" Jack: Tip Hot, Sleeve Ground; XLR Jack: Pin 2 Hot, Pins 1 & 3 Ground
- Output Impedance > 600 Ohms
- Output Connectors XLR balanced
- Distortion (THD) < 0.005% at 1kHz, 0dBu
- Output Noise <-100dB unweighted
- Frequency Response 10Hz to 70kHz, +0dB/-3dB
- Main/Standby 9 Volt battery
- Phantom Power +18 Volts DC to +48 Volts DC
- Hmotnost: 0.500kg
- Output impedance: > 600 Ohms
- Signal pass through connector
- Output connector: XLR balanced
- Battery led indicator
- Distortion: (THD) < 0.005% at 1kHz, 0dBu
- Phantom power led indicator
- Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
- Output Noise: <-100dB unweighted
- TS and XLR inputs and outputs
- Frequency response: 10Hz to 70kHz, +0dB/-3dB
- Attenuation control
- Phantom Power: +18 volts DC to +48 volts DC
- Ground lift switch
- Main/Standby: 9V battery
- Input Impedance: >250k Ohm
- Metal Chassis
- Input Impedance > 250k Ohm
- Max Input +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
- Connectors Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced), 1/4" Jack: Tip Hot, Sleeve Ground; XLR Jack: Pin 2 Hot, Pins 1 & 3 Ground
- Output Impedance > 600 Ohms
- Output Connectors XLR balanced
- Distortion (THD) < 0.005% at 1kHz, 0dBu
- Output Noise <-100dB unweighted
- Frequency Response 10Hz to 70kHz, +0dB/-3dB
- Main/Standby 9 Volt battery
- Phantom Power +18 Volts DC to +48 Volts DC
- Hmotnost: 0.500kg
Hlášení nesprávných údajů ohledně tohoto produktu
Hlášení nesprávných údajů
Viděli jste chybu týkající se tohoto produktu? Prosím, opište ji níže a my ji co nejdříve prozkoumáme