Login with Facebook
Lieferung angekommen, alles bestens - Top Jop gemacht.
LEWITT Connect 2
USB Interface
CAD 270.05
Incl. VAT
| Product # | 248693 |
| Brand | LEWITT |
| Category | USB Interfaces |
| Release date | June 2024 |
| Availability |  1 unit in stock |
| Shop | Availability |
|---|---|
| External Warehouse |
Average delivery time: 4-14 days |
Unit: 1 Stk.
Shipping cost: Shipping cost on demand
Description
Sensational sound with just a few clicks.
CONNECT 2 is the most user-friendly audio interface for musicians and content creators. It combines great usability, powerful features, and incredible specs.
Comes with CONTROL CENTER software and all the tools to make you sound sensational with just a few clicks.
Autosetup dials in your optimal settings.
With CONNECT 2, you don't need an audio engineering degree to sound great. Run Autosetup and quickly find your perfect settings with the help of the integrated Clipguard, Denoiser, Compressor, and three iconic preamp sounds.
Easy-to-use tools for perfect sound.
Clipguard Clipguard
Clipguard lets you perform without clipping. A single click is enough, and your signal is safe from clipping even when things get loud. Fantastic for streaming, podcasting, and recording alike.
Three iconic preamp sounds for the right vibe.
Clean gives you unparalleled clarity and fidelity. Perfect if you want to process your signal further.
Warm provides a vintage vibe and helps to smoothen the high-end of overly bright microphones.
Vivid brings even your dullest-sounding microphone alive and adds articulation by boosting the right frequencies.
Tailored input for instruments.
The differential Hi-Z input works with any guitar, from vintage single coils to modern active humbuckers. It delivers extra clarity to make your recordings sound fresh and defined. Its ground break loop circuit allows for enhanced hum immunity.
CONNECT 2 is the most user-friendly audio interface for musicians and content creators. It combines great usability, powerful features, and incredible specs.
Comes with CONTROL CENTER software and all the tools to make you sound sensational with just a few clicks.
Autosetup dials in your optimal settings.
With CONNECT 2, you don't need an audio engineering degree to sound great. Run Autosetup and quickly find your perfect settings with the help of the integrated Clipguard, Denoiser, Compressor, and three iconic preamp sounds.
Easy-to-use tools for perfect sound.
Clipguard Clipguard
Clipguard lets you perform without clipping. A single click is enough, and your signal is safe from clipping even when things get loud. Fantastic for streaming, podcasting, and recording alike.
Three iconic preamp sounds for the right vibe.
Clean gives you unparalleled clarity and fidelity. Perfect if you want to process your signal further.
Warm provides a vintage vibe and helps to smoothen the high-end of overly bright microphones.
Vivid brings even your dullest-sounding microphone alive and adds articulation by boosting the right frequencies.
Tailored input for instruments.
The differential Hi-Z input works with any guitar, from vintage single coils to modern active humbuckers. It delivers extra clarity to make your recordings sound fresh and defined. Its ground break loop circuit allows for enhanced hum immunity.
Attributes
Key attributes
| ||||||||||||||||
USB-Audio-Interface attributes
| ||||||||||||||||
Product Details
| ||||||||||||||||
Dimension
|
Properties
- USB-C audio interface
- Autosetup for sensational sound with just a few clicks
- Clipguard protects from distortion
- Single-click Compressor and Denoiser
- Three iconic preamp sounds
- Touch-based and intuitive controls
- Custom button for workflow shortcuts
- Individual LED colors and brightness
- Weight: 0.600kg
- Autosetup for sensational sound with just a few clicks
- Clipguard protects from distortion
- Single-click Compressor and Denoiser
- Three iconic preamp sounds
- Touch-based and intuitive controls
- Custom button for workflow shortcuts
- Individual LED colors and brightness
- Weight: 0.600kg
Specifications
- Features: RGBW LEDs, MUTE, custom button, autogain, input / playback mix, gain reduction display, Kensington lock
- Control: Capacitive touch
- Inputs: 1x Microphone: balanced 3-pin XLR, 1x Instrument: Hi-Z 6.3 mm jack
- Outputs: 2x Speaker: 6.3 mm balanced jack, 1x Headphone: 6.3 mm jack, 1x Headphone: 3.5 mm jack
- Metering: 25 step high-resolution
- Dimensions and weight: 151 x 110 x 41 mm, 394 g
- Power requirements: USB bus-powered
- Type: USB-C audio interface
- Software: LEWITT CONTROL CENTER
- DAW included: Steinberg Cubase LE, Cubasis LE
- Compatibility: MacOS, Windows, iOS (plug and play with USB-C devices, devices with lightning connector require Camera Connection Kit and external bus power)
- ASIO driver: Yes
- Sample rate: 44.1 kHz, 48 kHz, 96 kHz
- Bit rate: 24
- USB Audio Class: 2.0
- Signal flow: Input / playback mix
- DSP powered: Yes
- Loopback: Yes
- Inputs / Outputs: 4 (includes 2 software channels) / 2
- Streaming modes: macOS mode, mobile mode
- Min. system requirements: Windows 10 (64 bits): 4 GB RAM minimum, USB 2.0 connector; macOS 10.15 and higher: 4 GB RAM minimum, USB 2.0 connector
Microphone Input:
- Features: DSP (low-cut filter, clipguard, preamp modes, denoise, compressor, autogain, autosetup)
- Type: balanced
- Connector: 3-pin XLR
- Phantom power: 48 V
- Gain range: 0 - 72 dB
- Equivalent input noise: –129 dBV (A)
- Dynamic range: 118 dB (A) - Without clipguard 118 dB (A)
- Max input level: 15.8 dBV
- Total harmonic distortion: 0.001%
- Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
Instrument Input:
- Features: DSP (low-cut filter, clipguard, preamp modes, denoise, compressor, autogain, autosetup)
- Type: Hi-Z, differential ground loop break circuit
- Connector: 6.3 mm jack
- Gain range: 0 - 60 dB
- Input impedance: 2.5 M Ω
- Equivalent input noise: –108 dBV (A)
- Dynamic range: 121 dB (A) - Without clipguard 105 dB (A)
- Max input level: 12.5 dBV
- Total harmonic distortion: 0.0008%
- Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
Speaker Output:
- Features: High volume speaker mode, Mute, Volume, Map system volume controls
- Connector: 2x 6.3 mm jack, balanced
- Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
- Max output level: 12.2 dBV (high volume mode)
- Total harmonic distortion: 0.0023%
- Impedance: 200Ω
Headphone Output:
- Features: High impedance headphone mode, Mute, Volume, Map system volume controls
- Connector: 1x 6.3 mm jack, stereo, 1x 3.5 mm jack, stereo
- Frequency response: 20 Hz - 20 kHz (± 0.2 dB)
- Max output level: 6.8 dBV (high impedance mode)
- Total harmonic distortion: 0.003%
- Impedance: 1.9 Ω
- Control: Capacitive touch
- Inputs: 1x Microphone: balanced 3-pin XLR, 1x Instrument: Hi-Z 6.3 mm jack
- Outputs: 2x Speaker: 6.3 mm balanced jack, 1x Headphone: 6.3 mm jack, 1x Headphone: 3.5 mm jack
- Metering: 25 step high-resolution
- Dimensions and weight: 151 x 110 x 41 mm, 394 g
- Power requirements: USB bus-powered
- Type: USB-C audio interface
- Software: LEWITT CONTROL CENTER
- DAW included: Steinberg Cubase LE, Cubasis LE
- Compatibility: MacOS, Windows, iOS (plug and play with USB-C devices, devices with lightning connector require Camera Connection Kit and external bus power)
- ASIO driver: Yes
- Sample rate: 44.1 kHz, 48 kHz, 96 kHz
- Bit rate: 24
- USB Audio Class: 2.0
- Signal flow: Input / playback mix
- DSP powered: Yes
- Loopback: Yes
- Inputs / Outputs: 4 (includes 2 software channels) / 2
- Streaming modes: macOS mode, mobile mode
- Min. system requirements: Windows 10 (64 bits): 4 GB RAM minimum, USB 2.0 connector; macOS 10.15 and higher: 4 GB RAM minimum, USB 2.0 connector
Microphone Input:
- Features: DSP (low-cut filter, clipguard, preamp modes, denoise, compressor, autogain, autosetup)
- Type: balanced
- Connector: 3-pin XLR
- Phantom power: 48 V
- Gain range: 0 - 72 dB
- Equivalent input noise: –129 dBV (A)
- Dynamic range: 118 dB (A) - Without clipguard 118 dB (A)
- Max input level: 15.8 dBV
- Total harmonic distortion: 0.001%
- Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
Instrument Input:
- Features: DSP (low-cut filter, clipguard, preamp modes, denoise, compressor, autogain, autosetup)
- Type: Hi-Z, differential ground loop break circuit
- Connector: 6.3 mm jack
- Gain range: 0 - 60 dB
- Input impedance: 2.5 M Ω
- Equivalent input noise: –108 dBV (A)
- Dynamic range: 121 dB (A) - Without clipguard 105 dB (A)
- Max input level: 12.5 dBV
- Total harmonic distortion: 0.0008%
- Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
Speaker Output:
- Features: High volume speaker mode, Mute, Volume, Map system volume controls
- Connector: 2x 6.3 mm jack, balanced
- Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
- Max output level: 12.2 dBV (high volume mode)
- Total harmonic distortion: 0.0023%
- Impedance: 200Ω
Headphone Output:
- Features: High impedance headphone mode, Mute, Volume, Map system volume controls
- Connector: 1x 6.3 mm jack, stereo, 1x 3.5 mm jack, stereo
- Frequency response: 20 Hz - 20 kHz (± 0.2 dB)
- Max output level: 6.8 dBV (high impedance mode)
- Total harmonic distortion: 0.003%
- Impedance: 1.9 Ω
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible