Audix VX10
Condenser Microphone
CHF 679.00
MSRP: CHF 705.00
MSRP: CHF 705.00
Free delivery (CH)
Product # | 133096 |
Brand | Audix![]() |
Category | Condenser Microphones | Brand Category | Audix - Condenser Mics |
Series | Audix VX |
Release date | June 2008 |
Availability | ![]() |
This page contains auto-translated text
Description
With a smooth uniform response over a frequency range of 40 - 20k Hz, the VX -10 is highly sensitive to transient response and will reproduce vocals and speech with exceptional detail and realism. The VX -10 will handle close miking with minimal proximity effect and will not lose signal if the user is slightly off-axis from the front of the microphone. A cardioid pattern provides excellent gain before feedback and, even with it's extended low end response, the VX -10 offers sonic clarity without "boominess" in the lower mids - usually difficult to achieve with live vocals. The VX -10 operates on phantom power of 48 - 52 volts and will achieve optimal results with a high quality mic preamp. Low noise electronic circuitry, low impedance, and balanced output allow interference-free performance even with long cable runs.
Attributes
Product Warranty
| ||||||||||||||
Product Details
|
Properties
Transducer Type: Condenser
Frequency Response: 40Hz - 20kHz
Polar Pattern: Cardioid
Output impedance: 250 ohms
Open Circuit Sensitivity: 23mV
(ref 1k @ 1 Pascal)
Equivalent Noise Level: 19 dB (A weighted)
Signal to noise ratio: 73dB
(ref 1k @ 1 Pascal)
Power Requirements: 48 - 52v phantom
Maximum SPL: 138dB
Cable/Connector: 3 pin gold
plated male
XLR connector
Polarity: Positive voltage on pin
2 relative to pin 3 of
output XLR connector
Housing: Die cast zinc body with
brass capsule housing
Weight: 11.24 oz / 318.6 grams
Finish: Black E-coat
Frequency Response: 40Hz - 20kHz
Polar Pattern: Cardioid
Output impedance: 250 ohms
Open Circuit Sensitivity: 23mV
(ref 1k @ 1 Pascal)
Equivalent Noise Level: 19 dB (A weighted)
Signal to noise ratio: 73dB
(ref 1k @ 1 Pascal)
Power Requirements: 48 - 52v phantom
Maximum SPL: 138dB
Cable/Connector: 3 pin gold
plated male
XLR connector
Polarity: Positive voltage on pin
2 relative to pin 3 of
output XLR connector
Housing: Die cast zinc body with
brass capsule housing
Weight: 11.24 oz / 318.6 grams
Finish: Black E-coat
Warranty
Manufacturer Warranty (5 years) :
Report incorrect data about this product