Login with Facebook
Dieses Produkt ist der Wahnsinn. Mann muss es selber erst mal gehört haben um festzustellen wie authentisch die Amps tönen.
Alleine von den Presets die mitkommen, hat es viel brauchbares dabei. Ich habe bereits mit ein paar kommerziellen Profilen herumgespielt, die nochmal ein Level besser sind (z.B. Guidorist oder mbritt Profile)
Einen Stern abzug gibts lediglich bei Operation - der KPA hat eine massive Lernkurve. Die Möglichkeiten sind am Anfang schlicht überwältigend. Nur ein Beispiel: ich kann EQs vor dem Stack als Stomp, mit dem Stack vor dem Amp, mit dem Stack nach dem Amp oder zwischen Vor- und Endstufe setzen - alleine diese Möglichkeiten haben massive Tonunterschiede, welche das einstellen von eigenen Sounds sehr komplex gestalten.
Das Teil zu beherschen lernen an sich macht aber schon enorm spass.
Fazit: Der KPA wird künftig meine primäre Sound-Einheit werden ohne das Gefühl haben zu müssen, dass mir soundtechnisch gegenüber einem Röhrenamp im Bandkontext etwas fehlt.
Kemper Profiler Power Rack + Profiler Remote (Black)
Guitar Amplifier Head
CHF 1849.00
MSRP: CHF 2138.80
MSRP: CHF 2138.80
Free delivery (CH)
| Product # | 219635 |
| Brand | Kemper |
| Category | Guitar Amplifier Heads | Brand Category | Kemper - Heads |
| Release date | August 2020 |
| Availability | ![<h3>Availability</h3><span><span class="green">1 [[missing key: unit-s]] in stock</span></span>](/layout/image/stock/green.png "<h3>Availability</h3><span><span class=\"green\">1 [[missing key: unit-s]] in stock</span></span>") 1 [[missing key: unit-s]] in stock |
| Shop | Availability |
|---|---|
| Giebenach BL |
1 piece in stock |
Condition
: Mint
Description
Profiler Remote:
is the quintessential foot controller for your Profiler. We've spent a tremendous amount of time to create a versatile and yet easy to operate floor board. The tight integration in between Profiler and Remote allows you to control, administer and program without any knowledge about MIDI or delving through cryptic data sheets.
The large, illuminated display is designed to be looked at from a distance and Remote's housing is built like a tank. Just what the doctor orders for touring musicians on dark stages.
Five buttons allow you to directly access five different programs ("Rigs") and entire performance programs can be switched using a bank system. There are dedicated buttons to access the tuner, tap tempo in and enable the new, exclusive Looper Effect.
Remote connects via a single Ethernet cable to your Profiler. No extra power supply is required and the included cable is 7 meters long (21ft). Longer cables are possible as well.
Up to four continuous foot pedals can control multiple parameters inside your Profiler. Four buttons switch of stomps and effects. The programming required is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.
The Profiler Rack:
has a 19" enclosure. It offers the same feature set as the Profiler Head. The only difference is the absense of the LED collars around the controls on the bottom line (except gain) as well as the two controls for the MOD section. We 've omited those controls to fit the entire unit into only 3 hight units.
is the quintessential foot controller for your Profiler. We've spent a tremendous amount of time to create a versatile and yet easy to operate floor board. The tight integration in between Profiler and Remote allows you to control, administer and program without any knowledge about MIDI or delving through cryptic data sheets.
The large, illuminated display is designed to be looked at from a distance and Remote's housing is built like a tank. Just what the doctor orders for touring musicians on dark stages.
Five buttons allow you to directly access five different programs ("Rigs") and entire performance programs can be switched using a bank system. There are dedicated buttons to access the tuner, tap tempo in and enable the new, exclusive Looper Effect.
Remote connects via a single Ethernet cable to your Profiler. No extra power supply is required and the included cable is 7 meters long (21ft). Longer cables are possible as well.
Up to four continuous foot pedals can control multiple parameters inside your Profiler. Four buttons switch of stomps and effects. The programming required is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.
The Profiler Rack:
has a 19" enclosure. It offers the same feature set as the Profiler Head. The only difference is the absense of the LED collars around the controls on the bottom line (except gain) as well as the two controls for the MOD section. We 've omited those controls to fit the entire unit into only 3 hight units.
Attributes
Key attributes
| ||||||||||||||||
Guitar Amplifier Head attributes
| ||||||||||||||||
Product Details
|
Specifications
Analog Inputs:
- Front INPUT: ¼ inch TS unbalanced, dynamic range >108 dB, impedance 1 megohms
- ALTERNATIVE INPUT: ¼ inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
- RETURN: XLR balanced, ¼ inch balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
Analog Outputs:
- MAIN OUTPUT L and R: XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu
- MONITOR OUTPUT: ¼ inch TS unbalanced with ground lift, output level: +4 dBu
- DIRECT OUTPUT/SEND: ¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB
- HEADPHONE Output: ¼ inch TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms
- Digital Input: S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit) with RCA phone connectors for coax cables (master only)
- Speaker Output: 600 Watts at 8 Ohm, 300 Watts at 16 Ohm
- MIDI IN/OUT/THRU: 5-pin DIN connectors
- SWITCH/PEDAL: ¼ inch TRS, each for mono/stereo switch or expression pedal (10 kohms min, 100 kohms max. impedance)
- Height: 13,9 cm (5.47 inches), 3 HE (3 RU)
- Width: 48,3 cm (19 inches)
- Depth: 22 cm (8.66 inches)
- Weight: 6,18 kg (13.62 pounds)
- Front INPUT: ¼ inch TS unbalanced, dynamic range >108 dB, impedance 1 megohms
- ALTERNATIVE INPUT: ¼ inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
- RETURN: XLR balanced, ¼ inch balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
Analog Outputs:
- MAIN OUTPUT L and R: XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu
- MONITOR OUTPUT: ¼ inch TS unbalanced with ground lift, output level: +4 dBu
- DIRECT OUTPUT/SEND: ¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB
- HEADPHONE Output: ¼ inch TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms
- Digital Input: S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit) with RCA phone connectors for coax cables (master only)
- Speaker Output: 600 Watts at 8 Ohm, 300 Watts at 16 Ohm
- MIDI IN/OUT/THRU: 5-pin DIN connectors
- SWITCH/PEDAL: ¼ inch TRS, each for mono/stereo switch or expression pedal (10 kohms min, 100 kohms max. impedance)
- Height: 13,9 cm (5.47 inches), 3 HE (3 RU)
- Width: 48,3 cm (19 inches)
- Depth: 22 cm (8.66 inches)
- Weight: 6,18 kg (13.62 pounds)
Reviews (3)
Overall review: 
[message:review-feature-name-operation]:
[message:review-feature-name-features]:
[message:review-feature-name-sound]:
[message:review-feature-name-operation]:
[message:review-feature-name-features]:
[message:review-feature-name-sound]:
3 customers
nobody
nobody
nobody
nobody
Overall review:
[message:review-feature-name-operation]:
[message:review-feature-name-features]:
[message:review-feature-name-sound]:
[message:review-feature-name-operation]:
[message:review-feature-name-features]:
[message:review-feature-name-sound]:
Please log in to rate this product review.
0
Kauftip! Ein Game-changer in der Gitarrenwelt
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Kemper Profiler Power Rack + Profiler Remote (Black)
#219635
Related products
