LEWITT MTP 840 DM
Dynamický Mikrofon
CHF 207.00
MSRP: CHF 283.15
MSRP: CHF 283.15
Free delivery (CH)
Product # | 178923 |
Brand | LEWITT![]() |
Category | Dynamické Mikrofony | Brand Category | LEWITT - Dynamické Mikrofony |
Series | LEWITT MTP |
Release date | December 2014 |
Availability | ![]() |
Description
The MTP 840 DM is a supercardioid handheld performance microphone. Its tailored frequency response ensures that your vocals will cut through every mix. The unique Active Mode boosts sensitivity by up to 12 dB while output impedance stays low.
Refined electronics and superior capsule design make the MTP 840 DM a unique tool for onstage use.
Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.
Remove the mesh, and you'll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.
The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice - side and rear sounds are effectively rejected.
Refined electronics and superior capsule design make the MTP 840 DM a unique tool for onstage use.
Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.
Remove the mesh, and you'll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.
The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice - side and rear sounds are effectively rejected.
Supplied items
Microphone, Microphone clip, Windscreen, Transport bag
Attributes
Key attributes
| ||||||||||||||
Product Details
|
Properties
Type: Dynamic, moving coil
Acoustical operating principle: Pressure gradient transducer
Polar pattern: Supercardioid
Frequency range: 40 ... 18,000 Hz
Sensitivity: 3.5 mV/Pa, -49 dBV/Pa
Signal / noise ratio: 75 dB (A)
Equivalent noise level: 19 dB (A)
Dynamic range, passive mode: 135 dB
Dynamic range, active mode:
-121 dB, 0 dB gain
-115 dB, 6 dB gain
-109 dB, 12 dB gain
Gain settings, active mode: 0 dB, 6 dB, 12 dB
Low-cut filter:
-linear
-150 Hz (12 dB/oct)
-250 Hz (12 dB/oct)
Internal impedance: 600 Ω
Rated load impedance: 1,000 Ω
Supply voltage: 48 V ± 4 V
Current consumption: 5.5 mA
Connector: Gold plated 3-pin XLR
Microphone dimensions: 51 dia. x 183 mm, 2 dia. x 7.2 in
Microphone net weight: 336 g
Acoustical operating principle: Pressure gradient transducer
Polar pattern: Supercardioid
Frequency range: 40 ... 18,000 Hz
Sensitivity: 3.5 mV/Pa, -49 dBV/Pa
Signal / noise ratio: 75 dB (A)
Equivalent noise level: 19 dB (A)
Dynamic range, passive mode: 135 dB
Dynamic range, active mode:
-121 dB, 0 dB gain
-115 dB, 6 dB gain
-109 dB, 12 dB gain
Gain settings, active mode: 0 dB, 6 dB, 12 dB
Low-cut filter:
-linear
-150 Hz (12 dB/oct)
-250 Hz (12 dB/oct)
Internal impedance: 600 Ω
Rated load impedance: 1,000 Ω
Supply voltage: 48 V ± 4 V
Current consumption: 5.5 mA
Connector: Gold plated 3-pin XLR
Microphone dimensions: 51 dia. x 183 mm, 2 dia. x 7.2 in
Microphone net weight: 336 g
Report incorrect data about this product