Login with Facebook
Two notes Reload II
MSRP: CHF 929.00
| Product # | 252450 |
| Brand | Two notes |
| Category | Power Attenuators | Brand Category | Two notes - Power Attenuators |
| Series | Two notes Analog Loadboxes |
| Release date | July 2025 |
| Availability |  Soon in backorderNotify me
|
| Shop | Availability |
|---|---|
| Giebenach BL |
Not in stock |
Description
Unleash the Beast
The latest installment in Two Notes' legacy of class-leading reactive load solutions marks the definitive turning point in modern backline control. Featuring dual-channel operation, selectable multi-impedance compatibility, and true continuous attenuation, Reload II is Two notes most advanced load box yet. Its mission is simple: to unleash the power of any amp or line-level source without compromise. Armed with a ground-up redesign of our signature reactive load for Celestion®-approved load response, the match is set to drive any amp's power stage (rated up to 200W RMS) to perfection, while maintaining all the sonic integrity your performance demands. Scalable from a whisper to a full-throttle onslaught, Reload II's ultra-transparent dual-mono 215W (per channel) amplifier/attenuator and paired speaker outputs preserve every facet of your tone. Add a stereo FX loop, dual line outputs, and GENOME Reload II Edition (software download) to the mix, and Reload II doesn't just enhance your rig, it redefines it.
Continuous Active Attenuation
It's a fact: dialing in your amp's sweet spot means driving its power stage. The downside? Your driver will be moving a lot of air! The answer is simple: Reload II's dual-channel continuous attenuator, powered by an integrated, ultra-transparent power amp. In short, it's everything you need to experience the harmonic saturation, organic feel, and dynamic response that only a pushed tube amp can provide-all with total control over your partner cab's output.
Maximum Firepower!
From a line-level source to a low-power amp - or simply a scenario that requires a second speaker output - Reload II's two-channel sonic muscle delivers a whopping 215W per cab, elevating even the most modest rig to mainstage status!
Loop Command
For top-of-the-line FX integration, look no further than Reload II's footswitchable stereo FX loop. With series/parallel routing capabilities, return dry/wet mix controls, and dual mono / A->B link modes, it's primed to add a full-featured stereo FX loop to your amp, or even create a quasi W/D/W configuration with just two cabinets.
Peak Performance
Under the hood, Reload II packs some serious horsepower. For those times when you need to "punch it," an arsenal of controls designed for no-nonsense signal optimization guarantees to unleash every iota of power on tap. For starters, a variable AMP IN LEVEL knob-and associated status indicators-prepares any amp to take full advantage of Reload II's dual 215-watt per-channel power amp. Add a multi-step clipping indicator into the equation, and the stage is set for unparalleled authority to elevate any source signal through Reload II's architecture.
Celestion® Approved Load Response
Feel, Response, Tone - they're the bedrock of performance, all rooted in a world-class load response that's second to none. It's this mantra that spawned Reload II, an all-new reactive load and the final word in next-generation load box technology. For starters, a complete overhaul of our load design delivers an impedance curve inspired by Celestion®'s iconic driver line for an industry-first "Celestion® Approved Load Response". Combine that with switchable multi-impedance capability (4, 8, and 16 ohms), and you're ready to get the most out of any amp in your collection.
Whatever Your Rig, Reload It!
Whether it's a modeler, a fly rig, an amp or an amp sim, Reload II is built to do the job. For starters, a multi-impedance Amp In and dual Line Inputs make it a breeze to connect anything from the power stage of a 200-watt amp to a dual mono/stereo line level source. Throw in two-channel operation-complete with independent source selection for each channel-and Reload II is ready for any scenario, from the bedroom to the main stage.
Attributes
Product Details
| ||||||||||||||
Product Quantity
|
Properties
- Compatible with tube and solid-state amplifiers up to 200W RMS; selectable multi-impedance compatibility (4, 8, 16 ohms)
- Dual-channel operation with dedicated source selection per channel for (1) amp input and (2) line inputs
- Continuous active attenuation from complete silence (load box operation) to stage-ready source amplification
- Stereo/double mono 215W (per channel, under 4Ω) studio-grade power amplifier; (2) independent cabinet outputs for amp rigs and/or line level inputs
- (2) XLR line outputs for easy integration with audio interfaces, cab sims and more
- Footswitchable stereo FX loop with series/parallel, dual mono and A>B link modes; selectable -10dB / +4dB send; return dry/wet mix control
- Front panel controls for complete control of amp input level, cabinet volume, channel specific source selection and XLR line out level
- Dedicated Depth & Presence controls per channel for hands-on tone shaping of the input source
- Built-in MOJO controls deliver high power feel even at low volumes
- Seamless gain stage optimisation throughout the Reload II architecture
- GENOME Reload II Edition included - the carrier-class plug-in software ecosystem for studio-grade cabinet simulation and more
- GENOME-Ready Series-R DynIR Cabinet Collection included - 24 premier DynIR virtual cabinets from Celestion® and Two notes Audio Engineering
- Genuine wood side panels for top-box configuration; rack-mountable (2U) using included rack ears
- Extended 3-year manufacturer's warranty available upon product registration
Specifications
- Maximum Input Voltage: 140V AC (45dBu)
- Max Security Load: 270 Ohm / 20W
- Load Input Level: Adjustable via potentiometer with continuous attenuation (-inf) to continuous amplififcation (+20dB)
- Speaker outputs: 2x Jack 6.35mm (1/4") unbalanced (TS)
- Min Load: 3.5 Ohm
Max Output Power (Single channel at THD+N <1%):
- 1x 215 W RMS @ 4 Ohm
- 1x 120 W RMS @ 8 Ohm
- 1x 50 W RMA @ 16 Ohm
Maximum Output Power (both channels drivenat THD+N <1%):
- 2x 150 W RMS @ 4 Ohm
- 2x 120 W RMS @ 8 Ohm
- 2x 50 RMS @ 16 Ohm
Line Inputs:
- Dual-Mono, (2) Jack 6.35mm (1/4") balanced (TRS , Tip/Ring/Sleeve)
- Siwtched jacks for routing to an unplugged channel
- Impedance: 300 Ohm
- Gain (In to Out): +4 to -inf dB
- Maximum Output Level: 20 dBu
- Noise: Under -99dBU from 20Hz to 20kHz
- Frequency Response @ -1dB: 20Hz to 20kHz
FX Loop:
- Dual-Mono FX loop with independent CHANNEL A and CHANNEL B controls
- (2) SEND + (2) RERUTN via 6.35mm (1/4") unbalanced (TS) Jack
- Compatibility with +4dBU and -10dBV devices, selectable via a dedicated switch per channel
- DRY/WET potentiometer with ON/OFF switch
- Facilities to Copy CHANNEL A return to CHANNEL B output via dedicated switch
- FX loop activation/deactivation via Footswitch with a 6.35mm (1/4") Jack (TRS, Tip/Ring/Sleeve) or (TS, Tip/Sleeve) compatible and configburable via dedicated Footswitch behaviour switch
- Load Box: Reactive Load featuring a Celestion Approved Load Response with nominal impedance: 4 / 8 / 16 Ohms (switchable)
- Maximum Admissible Power: 200W RMS (assuming proper ventilation)
- Maximum Temporary Admissible Power: 250W peak (assuming proper ventilation)
Tone Shaping:
- Tone Control: (1) DEPTH and (1) PRESENCE control per CHANNEL
- Flat response on potentiometers at 0%
- (1) MOJO Control per CHANNEL to deliver high-power feel at low volume
- Depth: +8dB @75Hz on potentiometer at 100%
- Presence: +8dB @4kHz on potentiometer at 100%
Safety / Protection:
- Cooling: Passive cooling with amplifier heatsink and Load Box heatsink
- Active cooling with temperature-controlled fan with 2 speeds (Slow & Boost)
- Thermal Security: To prevent damage to the internal Load Box,thermal cut off is implemented when the temperature rises over a predesignated thershold. When active, a 270 Ohm security load is placed into effect and the signal is muted.
- Power Supply: IEC60320 C14 Power Connector
- Input Voltage: Compatible with 100V - 230V @ 50 to 60Hz
- Power: 100W Max
- Dimensions (W x D x H): 365mm x 89mm x 220mm
- Weight: 6.9 kg
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
