Morley Line Level Shifter / 2 Channel Box - XLR/TRS

Passive Direct Injection Box

EUR 243.15

Incl. VAT. Free delivery in Czech Republic from EUR 398

Product #	222386
Brand	Morley
Category	Passive Direct Injection Boxes
Brand Category	Morley - Passive DI Boxes
Release date	April 2024
Availability	Will be ordered for you as quick as possible

Shipping cost: Shipping cost on demand

Add to wishlist

Top quality components and hardware

The primary function of the Morley Line Level Shifter is to increase or decrease signal voltage back and forth between -10 dBu and +4 dBV (depending on which way you route through it).

Be the first to write a review for this product

Description
Attributes
Properties
Brand

Description

The Line Level Shifter breaks loop antenna that causes ground hum and buzz, as well as converting back and forth between balanced and unbalanced connections and preventing the cable to act as an antenna for noise. Simply place a channel of the Line Level Shifter on the cable connections between the two mismatching pieces of equipment. The Line Level Shifter will not affect the quality of the audio, it will improve it.

Morley uses 1/4" (6.3 mm) smart jacks that accept any combination of unbalanced (TS) or balanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards.

Attributes

Product Details

Product Number	222386
Brand	Morley
Category	Passive Direct Injection Box
Brand Category	Morley - Passive DI Boxes
Relevancy rank	25 of 54
Date	April 2024

Properties

- 2-channel Line Level Shifter
- 1/4" (6.3 mm) Smart Jacks and XLR jacks
- Converts signal voltage back and forth between -10 dBu and +4 dBV
- Prevents ground loops that cause hum and buzz
- Passive operation (no power supply required)
- Frequency response 10 Hz to 40 kHz at +/- 1 dB
- Distortion less than 0.002% THD @ 1 kHz
- Crosstalk better than -97 dB
- Max. source impedance 1 kOhm, min. load impedance 10 kOhm
- Dimensions (L x W x H) 120 x 82 x 44 mm / 4.75" x 3.25" x 1.75"
- Made in USA

Brand

Morley® Pedals contain Innovative Designs, Clever Features, Bullet-Proof Construction and each and every one is Hand Assembled in the U.S.A. with American Made Pride. Morley® pedals are designed for musicians who want more than just the same old pedals built the same old way. When you are ready, we'll be here.

Report incorrect data about this product