Universal Audio Volt 1 USB Recording Studio

USB-C to USB-A cable
USB-A to barrel (5VDCplug)

Included UA Software:
- LUNA Digital Audio Workstation
- PolyMAX Polyphonic Synth
- Century Tube Channel Strip
- Pultec Passive EQ Collection
- Teletronix LA-2A Classic Leveler Collection
- Galaxy Tape Echo
- Pure Plate Reverb
- Oxide Tape Recorder
- Verve Analog Machines Essentials

Included 3rdParty Software:
- Marshall®Plexi Classic Amp Bundle by Softube
Ableton Live Lite
- Melodyne Essential by Celemony
- Ampeg®SVT-VR Classic Bass Bundle by Plugin Alliance
- LX480 Essentials by Relab Development
- Virtual Drummer DEEP by UJAM
- Virtual Bassist DANDY by UJAM
- LABS by Spitfire Audio

- Desktop 1-in / 2-out USB audio interface with 1 preamp and class-leading 24-bit / 192 kHz audio conversion
- Vintage Mic Preamp mode for recording your voice, guitar, or any instrument with the rich, full sound of an iconic UA tube preamp
- Listen in realtime as you record with Direct Monitoring for latency-free recording
- Bus-powered and class-compliant for hassle-free set-up with Mac, PC, iPad, and iPhone using the included USB-C to USB-A cable
- Studio-quality headphone amplifier for loud, clear monitoring
- 48V phantom power for condenser microphones
- Stylish, rugged construction built to withstand years of use

I/O:
- Monitor Outputs: Two (one stereo pair)
- Headphone Output: One stereo
- USB: One USB 2.0 port (USB Type-C connector)
- MIDI: In, Out (two 5-pin DIN connectors)
A/D –D/A Conversion:
- Supported Sample Rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192
- Bit Depth: 24
ANALOG I/O:
Microphone Input(s):
- Frequency Response:20 Hz to 20 kHz, ±0.1 dB
- Dynamic Range (A–weighted): 112 dB
- THD + Noise (1 kHz @ -1 dBFS): -103 dB (0.0007 %)
- Equivalent Input Noise (150 Ohms, A-weighted):-127 dBu
- Maximum Input Level: 9 dBu
- Input Impedance: 3 Kilohms
- Available Gain: 55 dB
- Phantom Power: +48V (switchable)
- Connector Type: XLR Female, pin 2 positive
- Instrument Input(s)
- Frequency Response:20 Hz to 20 kHz, ±0.05 dB
- Dynamic Range (A–weighted): 111 dB
- THD + Noise (1 kHz @ -1 dBFS): -84 dB (0.006 %)
- Maximum Input Level: 12.5 dBu
- Input Impedance: 1 Megohms
- Available Gain: 55 dB
- Connector Type: ¼” TS unbalanced
Line Input(s):
- Frequency Response:20 Hz to 20 kHz, ±0.05 dB
- Dynamic Range (A–weighted): 111 dB
- THD + Noise (1 kHz @ -1 dBFS): -102 dB (0.0008 %)
- Maximum Input Level: 22 dBu
- Input Impedance: 15 Kilohms
- Available Gain: 55 dB
- Connector Type: ¼” TRS balanced or TS unbalanced
Monitor & Line Output(s):
- Frequency Response:20 Hz to 20 kHz, ±0.1 dB
- Dynamic Range (A–weighted): 110 dB
- THD + Noise (1 kHz @ -1 dBFS): -102.5 dB (0.00075%)
- Maximum Output Level: 15 dBu
- Output Impedance: 100 Ohms
- Connector Type: ¼” TRS balanced or TS unbalanced
Headphone Output(s):
- Frequency Response:20 Hz to 20 kHz, ±0.1 dB
- Dynamic Range (A–weighted): 110 dB
- THD + Noise (1 kHz @ -1 dBFS): -102.5 dB (0.00075%)
- Maximum Output Level: 15 dBu
- Output Impedance: 100 Ohms
- Connector Type: ¼” TRS balanced or TS unbalanced
SYSTEM REQUIREMENTS:
macOS & Windows:
Available USB 2.0 (or higher) port
USB cable (included)
Intel, AMD, or Apple silicon processor
Windows 10 or Windows 11 (64-bit editions)
macOS Catalina 10.15 or newer operating system
Internet connection for software downloads
iPad & iPhone:
iPadOS / iOS 14 or newer