Login with Facebook
(1)
Vielen Dank für das sehr interessante Angebot, werde Spass haben bei euch einzukaufen. Danke für die schnelle Antwort.
Shure Beta 87C
Kondensator Gesangsmikrofone
EUR 368.05
Incl. VAT, free shipping
| Product # | 66647 |
| Brand | Shure |
| Category | Kondensator Gesangsmikrofone | Brand Category | Shure - Kondensator |
| Series | Shure Beta (Beta Mikrofone) |
| Release date | May 2012 |
| Availability |  In stock |
| Shop | Availability |
|---|---|
| External Warehouse |
Average delivery time: 4-14 days |
Description
Developed in response to professional demands associated with the use of personal monitoring devices like the Shure PSM series, the Beta87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design.
The uniform cardioid polar pattern of the Beta 87C enables users to effectively reject ambient noise arriving at the rear of the microphone, an attribute that will be especially appealing to users of personal monitors and others who frequently experience undesireable sounds bleeding into their mixes.
Beta 87C - Includes stand adapter. Cable not included.
The uniform cardioid polar pattern of the Beta 87C enables users to effectively reject ambient noise arriving at the rear of the microphone, an attribute that will be especially appealing to users of personal monitors and others who frequently experience undesireable sounds bleeding into their mixes.
Beta 87C - Includes stand adapter. Cable not included.
Attributes
Product Details
| ||||||||||||||
Dimension
|
Properties
- Smooth, wide frequency response with slight presence rise
- Uniform cardioid polar pattern for maximum isolation
- Minimum off-axis tone coloration
- Low-frequency roll-off compensates for proximity effect
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 - 20,000 Hz
- Weight: 0.390kg
- Uniform cardioid polar pattern for maximum isolation
- Minimum off-axis tone coloration
- Low-frequency roll-off compensates for proximity effect
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 - 20,000 Hz
- Weight: 0.390kg
Specifications
- Transducer Type: Condenser (electret bias)
- Frequency Response: 50 to 20,000 Hz
- Polar Pattern: Cardioid
- Output Impedance: Rated at 150 ohms (100 Ohms actual +/- 20%)
- Recommended minimum load impedance: 800 ohms
- Sensitivity (at 1,000 Hz): Open Circuit Voltage: -51 dBV/Pa (2 mV) (1 Pa = 94 dB SPL)
- Output Clipping Level: 1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V)
- Maximum SPL: 139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load)
Self-Noise:
- 22 dB typical, A-weighted
- 24 dB typical, weighted per DIN 45 405 (equivalent sound pressure level; measured with true rms voltmeter)
- Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
- Hum Sensitivity: -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)
- Signal-to-Noise Ratio: 72 dB at 94 dB SPL (IEC 651) S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
- Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
- Current Drain: 1.0 to 1.2 mA
- Connector: Three-pin (XLR) professional audio
- Case: Aluminum construction with painted blue metallic finish, and hardened steel grille with nickel satin chrome plating
- Net Weight: 207 grams (7.6 oz)
- Packaged: 565 grams (1.24 lbs)
Environmental Conditions:
- Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F)(relative humidity <90%)
- Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity <80%)
- Frequency Response: 50 to 20,000 Hz
- Polar Pattern: Cardioid
- Output Impedance: Rated at 150 ohms (100 Ohms actual +/- 20%)
- Recommended minimum load impedance: 800 ohms
- Sensitivity (at 1,000 Hz): Open Circuit Voltage: -51 dBV/Pa (2 mV) (1 Pa = 94 dB SPL)
- Output Clipping Level: 1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V)
- Maximum SPL: 139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load)
Self-Noise:
- 22 dB typical, A-weighted
- 24 dB typical, weighted per DIN 45 405 (equivalent sound pressure level; measured with true rms voltmeter)
- Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
- Hum Sensitivity: -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)
- Signal-to-Noise Ratio: 72 dB at 94 dB SPL (IEC 651) S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
- Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
- Current Drain: 1.0 to 1.2 mA
- Connector: Three-pin (XLR) professional audio
- Case: Aluminum construction with painted blue metallic finish, and hardened steel grille with nickel satin chrome plating
- Net Weight: 207 grams (7.6 oz)
- Packaged: 565 grams (1.24 lbs)
Environmental Conditions:
- Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F)(relative humidity <90%)
- Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity <80%)
Documents (4)
Magazine
This product is featured in the following magazine articles::
Brand
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Shure Beta 87C
#66647
Recommended accessories
Shure A55M
EUR 41.15
Related products
