Behringer System 55

- Pre-assembled ”SYSTEM 55“ modular synthesizer with 38 vintage sounding modules from the ’70s
- 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
- 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
- 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
- 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
- 5x 902 VOLTAGE CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
- 4x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
- 1x 911A DUAL TRIGGER DELAY module with S-trig input and output
- 2x 921A OSCILLATOR DRIVER with 6x 921B VCOs and 1x 921 VCO gives you 7 fully featured voices
- 1x 960 SEQUENTIAL CONTROLLER module provides up to 24-step sequences in 8 steps with 3 rows
- 1x CM1A MIDI to CV converter enables control by MIDI keyboards or DAW, V-trig or S-trig outputs
- 3x CP3A-O module allows CV mixing and switching for the VCOs with 1 attenuator
- 3x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
- 2x 995 ATTENUATORS modules with 3 linked passive attenuators
- 1x 903A RANDOM SIGNAL GENERATOR module provides dual white and pink noise sources
- 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
- 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
- 1x 962 SEQUENTIAL SWITCH module expands the 960 module into a 24 step sequencer
- 1x BP28, 2x BP56 and 2x BP2 blanks panels for a total of 144HP expansion space
- 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
- 2x EURORACK GO cases including PSUs
- 2x EURORACK GO BRACKETS to link the 2 EURORACK GO cases together for easy patching

- Weight: 13.000kg
- Height: 415mm
- Width: 452mm
- Depth: 729mm

- Voltage Control (pitch):
- Source: Destination
- External MIDI Keyboard – MIDI Out: CM1A MIDI Interface MIDI In
- CM1A CV Output: 921A Frequency Input
- 21A Frequency Output: 921B Frequency Link (in series)
- Audio:
- 921B Waveform Outputs (three of four): CP3A-M Inputs
- CP3A-M Output: 904A Signal Input
- 904A Signal Output: 902 Signal Input
- 902 Signal Output: Your mixer/amplifier/DAW
- Voltage Control (amplitude):
- CM1A s-trigger Output: Multiple
- Multiple Output (three of): 2 x 911 s-trigger Input & 911A s-trigger Input
- 911A Output: 3rd 911
- 1st 911 Output: 1st 902 Control Input
- Voltage Control (modulation):
- 2nd 911 Output: 904A Control Input
- 921 Aux Sine Output: 2nd 902 Signal Input
- 2nd 902 VCA Signal Output: CP3A-O Input 4
- CP3A-O Outputs: 921B DC Mod Input (three of )
- 3rd 911 Output: 2nd 902 Control Input

Complete Modular Synthesizers with MIDI-to-CV Converters and EURORACK GO cases.

The Behringer SYSTEM-15/35/55 Series Eurorack Synthesizers are designed to serve our Musician, DJ & Production Customers.