Login with Facebook
(6)Temple Audio Design 4 Channel Buffer Module / 4X Mod Pro V2
Pedaalilaudan tarvike
CHF 220.90
| Product # | 244461 |
| Brand | Temple Audio Design |
| Category | Pedaalilaudan tarvikkeet | Brand Category | Temple Audio Design - Pedaalilaudan tarvikkeet |
| Series | Temple Audio Design Accessories |
| Release date | December 2023 |
| Availability |  Kaikki kappaleet on varattu |
Unit: 1 kpl
Shipping cost: Shipping cost on demand
Description
The 4X MOD Pro V2 mounts in the Modular Endpanel of your Templeboard and allows you to route 1⁄4” inputs and outputs through the side of your board.
INPUT/OUTPUT JACKS
The 4X MOD Pro features two buffered inputs and two buffered outputs. Whatever 1⁄4” signal you send into one jack will carry on to the corresponding jack on the other side.
LOOP A INPUT - Buffered input. Plug guitar in here.*
LOOP A OUTPUT - Buffered output. Out to front of amp.*
LOOP B INPUT- Buffered input. Input from amp’s FX loop send.*
LOOP B OUTPUT - Buffered output. Output to amp’s FX loop return.*
*This is the recommended configuration for the 4-cable method, but the 4X Pro V2 can be used for any setup requiring 2 inputs and 2 outputs.
SWITCHES:
1. Engage/disengage buffer on LOOP A INPUT
2. Engage/disengage buffer on LOOP A OUTPUT
3. Engage/disengage buffer on LOOP B INPUT
4. Engage/disengage buffer on LOOP B OUTPUT
5. Engage/disengage AUTO LOOP
AUTO LOOP allows you to quickly switch between rigs with or without FX loops. If no cables are present in the LOOP B jacks, your FX loop pedals are automatically re-routed to LOOP A OUTPUT (after your drive pedals and before the amp).
CONFIGURATION OPTIONS
The 4X MOD Pro is an excellent choice for setups that use the Four Cable Method. This setup lets you place
some of your pedals (I.e. compressors, overdrives) before your amplifier’s preamp/EQ section and the rest of your pedals (i.e. reverbs, delays) in the FX loop after the preamp/EQ section.
INPUT/OUTPUT JACKS
The 4X MOD Pro features two buffered inputs and two buffered outputs. Whatever 1⁄4” signal you send into one jack will carry on to the corresponding jack on the other side.
LOOP A INPUT - Buffered input. Plug guitar in here.*
LOOP A OUTPUT - Buffered output. Out to front of amp.*
LOOP B INPUT- Buffered input. Input from amp’s FX loop send.*
LOOP B OUTPUT - Buffered output. Output to amp’s FX loop return.*
*This is the recommended configuration for the 4-cable method, but the 4X Pro V2 can be used for any setup requiring 2 inputs and 2 outputs.
SWITCHES:
1. Engage/disengage buffer on LOOP A INPUT
2. Engage/disengage buffer on LOOP A OUTPUT
3. Engage/disengage buffer on LOOP B INPUT
4. Engage/disengage buffer on LOOP B OUTPUT
5. Engage/disengage AUTO LOOP
AUTO LOOP allows you to quickly switch between rigs with or without FX loops. If no cables are present in the LOOP B jacks, your FX loop pedals are automatically re-routed to LOOP A OUTPUT (after your drive pedals and before the amp).
CONFIGURATION OPTIONS
The 4X MOD Pro is an excellent choice for setups that use the Four Cable Method. This setup lets you place
some of your pedals (I.e. compressors, overdrives) before your amplifier’s preamp/EQ section and the rest of your pedals (i.e. reverbs, delays) in the FX loop after the preamp/EQ section.
Attributes
Key attributes
| ||||||||||||||
Pedaalilaudan tarvike attributes
| ||||||||||||||
Product Details
| ||||||||||||||
Product Quantity
|
Properties
- AUTO LOOP mode automatically routes the pedals in your FX loop before the amp when nothing is plugged into LOOP B
- The buffer circuit on each channel can be bypassed if you only require buffering at certain points
- Four ultra-low noise, ultra-low distortion, quality class-A buffers
- 5-year Warranty Available worldwide. Conditions apply, obviously
- All Temple MODs install easily with two screws.
- Easily switch between your practice amp and performance FX loop setup without re-wiring your whole rig
- The buffer circuit on each channel can be bypassed if you only require buffering at certain points
- Four ultra-low noise, ultra-low distortion, quality class-A buffers
- 5-year Warranty Available worldwide. Conditions apply, obviously
- All Temple MODs install easily with two screws.
- Easily switch between your practice amp and performance FX loop setup without re-wiring your whole rig
Specifications
- Power Requirements: 250mA at 9V or 150mA at 18V
- Input Impedance: 1MΩ
- Output Impedance: 150Ω
- Frequency Response: 20Hz-80kHz, +/- .25dB
- Total Harmonic Distortion plus Noise: 0.0005%
- Signal to Noise Ratio: 116dB @1Vrms
- NOTE: the 4X MOD Pro V2 will perform exactly the same whether powered with 9v or 18V
- Input Impedance: 1MΩ
- Output Impedance: 150Ω
- Frequency Response: 20Hz-80kHz, +/- .25dB
- Total Harmonic Distortion plus Noise: 0.0005%
- Signal to Noise Ratio: 116dB @1Vrms
- NOTE: the 4X MOD Pro V2 will perform exactly the same whether powered with 9v or 18V
Predecessor
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Temple Audio Design 4 Channel Buffer Module / 4X Mod Pro V2
#244461
Recommended accessories
BlackLine DC0103AA (15cm)
CAD 16.05
Related products
