Login with Facebook
The package has arrived thank you for your ongoing assistance throughout the
purchase and shipment. You and your team have been most helpful.
Behringer Multimode Filter / Resonator Module 1047
Voltage Controlled Filter
EUR 83.00
Incl. VAT. Free delivery in Croatia from EUR 199
| Product # | 222760 |
| Brand | Behringer |
| Category | Voltage Controlled Filters | Brand Category | Behringer - Voltage Controlled Filters |
| Release date | February 2021 |
| Availability |  In stock |
| Shop | Availability |
|---|---|
| External Warehouse |
Average delivery time: 4-14 days |
Unit: 1 piece(s)
Shipping cost: EUR 26.00
Description
This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original “System 2500” circuitry from the 70’s that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.
The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.
The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.
The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.
The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.
Attributes
Key attributes
| ||||||||||||
Module Specifications
| ||||||||||||
Case Specifications
| ||||||||||||
Power Consumption InformationMost Eurorack modules tend to only require the dual 12V rails (positive/negative), but some modules may need some amount of +5V current to function.
| ||||||||||||
Product Dimensions
| ||||||||||||
Voltage Controlled Filter attributes
| ||||||||||||
Product Details
| ||||||||||||
Dimension
|
Properties
- Classic-sounding 1047 analog multi-mode filter and resonator module from the ‘70s
- Authentic reproduction of the circuitry from the “2500” Series
- Consists of a highly resonant 12 dB low-pass/high-pass and 6 dB band-pass filters capable of providing a wide variety of formant shaping and tonal modulation
- Filter simultaneously provides high-pass, band-pass, low-pass and notch outputs
- Coarse and fine controls adjust the cut-off frequency of all four filter outputs from 16 Hz to 16 kHz with 2 external control signal inputs and attenuators
- Resonance (Q) control adjusts the level of the resonant peak of the low-pass and high-pass filters and the band-pass filter Q from 0.5 to over 256 with an external control signal input and attenuator
- Resonance (Q) control also adjusts the notch filter Q and depth in addition to adding resonance
- Resonance limit switch can be used to prevent overload when high levels of resonance are required
- Notch freq/fc control allows the notch frequency to be offset above or below fc while simultaneously allowing resonant peaks at fc using the resonance (Q) control
- Input attenuator control allows you to optimize signal level and coloration
- Eurorack specs: 16 HP, 55 mA+12 V, 45 mA -12 V
- Weight: 0.170kg
- Height: 43mm
- Width: 81mm
- Depth: 129mm
- Authentic reproduction of the circuitry from the “2500” Series
- Consists of a highly resonant 12 dB low-pass/high-pass and 6 dB band-pass filters capable of providing a wide variety of formant shaping and tonal modulation
- Filter simultaneously provides high-pass, band-pass, low-pass and notch outputs
- Coarse and fine controls adjust the cut-off frequency of all four filter outputs from 16 Hz to 16 kHz with 2 external control signal inputs and attenuators
- Resonance (Q) control adjusts the level of the resonant peak of the low-pass and high-pass filters and the band-pass filter Q from 0.5 to over 256 with an external control signal input and attenuator
- Resonance (Q) control also adjusts the notch filter Q and depth in addition to adding resonance
- Resonance limit switch can be used to prevent overload when high levels of resonance are required
- Notch freq/fc control allows the notch frequency to be offset above or below fc while simultaneously allowing resonant peaks at fc using the resonance (Q) control
- Input attenuator control allows you to optimize signal level and coloration
- Eurorack specs: 16 HP, 55 mA+12 V, 45 mA -12 V
- Weight: 0.170kg
- Height: 43mm
- Width: 81mm
- Depth: 129mm
Specifications
- Input Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: +18 dBu
Frequency CV input 1:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V/oct.
Frequency CV input 2:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V/oct.
Q CV input:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V doubles the Q factor
Outputs:
Filter outputs (LP / HP / BP / Notch):
- Type: 4 x 3.5 mm TS jack, DC coupled
- Impedance: 1 kΩ, unbalanced
- Max output level: +18 dBu
Controls:
- Coarse frequency: 1 x rotary knob, 31 Hz to 8 kHz
- Fine frequency: 1 x rotary knob, x1/2 to x2
- Resonance (Q): 1 rotary knob, Q = 0.5 to >256
- Resonance (Norm / lim): 2-way sliding switch Normal / limiting, switchable
- Frequency CV 1 / 2 attenuators: 2 x rotary knob, -∞ to unity gain
- Q CV attenuator: 1 x rotary knob, -∞ to unity gain
- Input attenuator: 1 x rotary knob, -∞ to unity gain
- Notch frequency/fc: 1 x rotary knob, ±3 octave range
- Power supply Current Draw: 55 mA (+12 V), 45 mA (-12 V)
- Dimensions: 43 x 81 x 129 mm (1.7 x 3.2 x 5.1")
- Rack units: 16 HP
- Weight: 0.17 kg (0.37 lbs)
- Impedance: 50 kΩ, unbalanced
- Max input level: +18 dBu
Frequency CV input 1:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V/oct.
Frequency CV input 2:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V/oct.
Q CV input:
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 50 kΩ, unbalanced
- Max input level: ±10 V
- CV scaling: 1 V doubles the Q factor
Outputs:
Filter outputs (LP / HP / BP / Notch):
- Type: 4 x 3.5 mm TS jack, DC coupled
- Impedance: 1 kΩ, unbalanced
- Max output level: +18 dBu
Controls:
- Coarse frequency: 1 x rotary knob, 31 Hz to 8 kHz
- Fine frequency: 1 x rotary knob, x1/2 to x2
- Resonance (Q): 1 rotary knob, Q = 0.5 to >256
- Resonance (Norm / lim): 2-way sliding switch Normal / limiting, switchable
- Frequency CV 1 / 2 attenuators: 2 x rotary knob, -∞ to unity gain
- Q CV attenuator: 1 x rotary knob, -∞ to unity gain
- Input attenuator: 1 x rotary knob, -∞ to unity gain
- Notch frequency/fc: 1 x rotary knob, ±3 octave range
- Power supply Current Draw: 55 mA (+12 V), 45 mA (-12 V)
- Dimensions: 43 x 81 x 129 mm (1.7 x 3.2 x 5.1")
- Rack units: 16 HP
- Weight: 0.17 kg (0.37 lbs)
Reviews (1)
Overall review: 
[message:review-feature-name-operation]:
[message:review-feature-name-features]:
[message:review-feature-name-sound]:
[message:review-feature-name-operation]:
[message:review-feature-name-features]:
[message:review-feature-name-sound]:
1 customer
nobody
nobody
nobody
nobody
Brand
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
