Fermer
Téléphone portable
  • +49 7666 61 99 68 0

Strymon Flint V2 Tremolo & Reverb

Tremolo Pedal
  • Strymon Flint V2 Tremolo & Reverb
  • Strymon Flint V2 Tremolo & Reverb
  • Strymon Flint V2 Tremolo & Reverb
  • Strymon Flint V2 Tremolo & Reverb
EUR 381.40
Free delivery in Pologne
D'une époque classique

La combinaison magique du trémolo et de la réverbération est le premier exemple d'un mariage parfait d'effets de guitare.
Product Rating5.0 sur 5 | 4 Avis |   Ecrire un avis
Cette page contient des descriptions traduites automatiquement par un service de traduction.  Afficher la version anglaise. 

Description

  • A Unique Rarity

    The ’61 Harmonic Tremolo is somewhat rare due to its very short period of availability in tube amplifiers in the early 1960s. It gets its signature sound through a dual-band filtering effect that alternately emphasizes low and high frequencies. The end result is a soothing pulse that has shades of a mild phaser effect combined with tremolo, due to the nature of the frequency bands that are alternated.

  • Totally Tubular

    The ’63 Power Tube Tremolo utilized the LFO signal to directly influence the power tube bias of the amplifier’s push-pull output stage. The power tubes are biased into lower and higher idle currents, creating the fluctuating gain that produces the tremolo effect. The effects of crossover distortion at low tremolo volumes, increased power tube harmonic distortion at maximum tremolo volumes, as well as the influence of power-supply sag, all add up to the boggy and dirty nature of this tremolo circuit.

  • Get To The Chopper

    The ’65 Photocell Tremolo is a faithful recreation of the classic photo-trem circuits found in mid-1960s American amplifiers. Those classic circuits used a light-dependent resistor (LDR) to attenuate the input signal, coupled with a miniature neon bulb that is connected to the LFO. As the LFO oscillates, the bulb gets brighter and dimmer which in turn varies the resistance of the LDR. The varying resistance works with other circuit impedances to change the signal level, which produces a characteristically “hard” sounding tremolo that moves between two levels, reminiscent of a square wave.

  • Sixties Surf

    The ’60s Spring Tank Reverb is our faithful recreation of the full-size two-spring tank that was commonly used in vintage amps. The two-spring tank uses spring segments of differing delay times, which adds to the complexity of the reverberated sound. Contributing greatly to the sound are the input and output tube circuits which convert the electrical guitar signal into a mechanical signal and then back to an electrical signal.

  • Sound Of The Seventies

    The ’70s Electronic Plate Reverb pays homage to one of the earliest digital reverbs ever created. The astounding hardware-based algorithm used multiple delay-lines configured in parallel, with each delay featuring multiple output taps and filtered feedback paths. The result is a rich, smooth reverb with a very quick build-up in density due to the summation of the many parallel output taps.

  • Totally Eighties

    The ’80s Hall Rack Reverb is our rendition of the now-nostalgic digital microprocessor rack reverbs from the late ’80s. The limited processing power of the day led to the implementation of efficient regenerative series loops of all-pass filters, delays, and low-pass filters. Modulating delay lines were used to increase the reverb density and add warmth. This reverb provides the signature sound of distinctive early reflections followed by the slowly-building density of the late reverberation.

  • Switch Things Up

    Want to run your reverb intro tremolo like your favorite vintage tube amps did? Or do you prefer modulation before reverb for a cleaner, modern tone? Flint gives you options for both with an Effect Order secondary function that lets you choose exactly how you want your reverb and tremolo routed for ultimate tonal control. This setting is accessible as a Live Edit secondary function and is savable per-preset.

  • Add Some Space

    Pre-Delay controls the delay time before the reverberated signal appears, and is now accessible as a Live Edit secondary function, savable per-preset.

D'abord pionnière dans les amplificateurs historiques des années 1960, cette coexistence harmonieuse a fait son chemin sur d'innombrables disques et performances - du surf des débuts, du blues du bayou marécageux, des westerns spaghetti et des bandes sonores de films noirs, au rock indé moderne. Au fur et à mesure que la musique avance, les guitaristes continuent de redécouvrir l'inspiration fournie par cette paire parfaite.

Flint est une pédale d'effets de classe studio qui offre cette combinaison classique. Nous avons soigneusement étudié nos circuits de trémolo et de réverbération classiques préférés, examiné les complexités sonores et fidèlement pris en compte chaque détail dans nos algorithmes fabriqués à la main. Flint est essentiellement deux pédales en une, avec un trémolo d'un côté et une réverbération de l'autre.


D'une époque classique.

Flint vous offre les effets palpitants et apaisants hypnotiques mis au point dans les circuits de trémolo d'amplificateurs vintage, ainsi que trois algorithmes de réverbération classiques et complètement uniques.

Du côté du trémolo de la pédale, vous pouvez choisir entre le '61 Harmonic Tremolo complexe sur le plan sonore, le marécageux et sensuel '63 Power Tube Tremolo et le '65 Photocell Tremolo net et équilibré. Du côté de la réverbération, vous pouvez sélectionner la réverbération Spring Tank classique des années 60, la réverbération à plaque électronique inventive des années 70 ou la réverbération Hall Rack nostalgique des années 80.

Avec neuf paramètres à régler, vous bénéficiez d'un contrôle étendu sur les caractéristiques du trémolo et de la réverbération. Passez du twang éclaboussant et pulsé au blues lancinant et marécageux, jusqu'aux nappes réverbérées ambiantes, tremblantes et sereines.

Ajoutez à cela un véritable bypass et une section frontale et de sortie analogique de qualité supérieure, et vous avez l'histoire du trémolo et de la réverbération dans un format adapté au pédalier.

Attributs

General Information
Manufacturer information <strong>Strymon Europe</strong> <br/>Unit 19B Hillside <br/>IP32 7EA Suffolk <br/>United Kingdom <br/> <br/><a href="mailto:chrisgooddie@me.com" target="_blank" rel="noopener">chrisgooddie@me.com</a>
Product Details
Product Number 239140
Brand Strymon
Category Tremolo Pedal
Brand Category Strymon - Tremolo Pedals
Relevancy rank 1 of 39
Date July 2022
Product Quantity
Unit 1 piece(s)
Dimension
Box Depth 230mm
Box Height 135mm
Gross Weight 0.78kg

Propriétés

- Entrée stéréo JFET TRS discrète de classe A ultra faible bruit à haute impédance.
- Sorties stéréo TS indépendantes à faible impédance.
- L'entrée pour pédale d'expression permet la connexion d'une pédale d'expression TRS, d'un MiniSwitch, d'un MultiSwitch Plus ou d'une connexion MIDI TRS.
- Prise USB pour contrôler via MIDI depuis un ordinateur ou pour effectuer des mises à jour du firmware.
- Commutateurs au pied dédiés Reverb On/Off et Tremolo On/Off

Spécifications

- Frontal analogique JFET Premium
- Les convertisseurs A/N et N/A 24 bits 96 kHz à très faible bruit et hautes performances offrent une qualité audio sans compromis
- Processeur superscalaire ARM 520 MHz
- Traitement en virgule flottante 32 bits
- Réponse en fréquence de 20Hz à 20kHz
- Impédance d'entrée audio : 1 M Ohm
- Impédance de sortie audio : 100 Ohm
- Châssis en aluminium noir anodisé solide et léger
- Alimentation 9V DC incluse
- Exigences d'alimentation : maximum 9 volts CC centre négatif, avec un minimum de 300 mA de courant
Dimensions:
4,5" de profondeur x 4" de large x 1,75" de haut
11,4 cm de profondeur x 10,2 cm de largeur x 4,4 cm de hauteur
Conçu et fabriqué aux États-Unis

Avis (4)

Evaluation globaleProduct Rating
[message:review-feature-name-operation]:  Product Rating
[message:review-feature-name-features]:  Product Rating
[message:review-feature-name-sound]:  Product Rating
Product Rating
4 clients
Product Rating
personne
Product Rating
personne
Product Rating
personne
Product Rating
personne
Evaluation globaleProduct Rating
[message:review-feature-name-operation]:  Product Rating
[message:review-feature-name-features]:  Product Rating
[message:review-feature-name-sound]:  Product Rating
Perfect dual pedal

All I can say is, buy this. Sounds great, very compact and easy to use, but if you are in to midi, it works great too. It will never come off my board.

Evaluation globaleProduct Rating
[message:review-feature-name-operation]:  Product Rating
[message:review-feature-name-features]:  Product Rating
[message:review-feature-name-sound]:  Product Rating
it got better!

Had the original Flint and it was great..
lower tremolo speeds sound very creamy,
foot switch settings are kept through power cycles, (less tap dancing)
pre amp section seems warmer...
Can highly recommend the upgrade...

Marque

Strymon is a well-known manufacturer of high-quality audio effects and signal processing equipment for musicians and audio enthusiasts. They are particularly renowned for their guitar and audio effect pedals. Strymon's products are highly regarded in the music industry for their exceptional sound quality and innovative features. They are used both in the studio and in live performances to enhance and shape the sound of instruments and audio signals.
Signaler une donnée incorrecte à propos de ce produit
Quantité:-+
Pourquoi choisir MusiX ?
  • Free delivery from 75 EUR (Germany)
  • 3 Year Warranty
  • 30,000 products in stock
  • Daily deliveries
Vos paramètres
Base de remise: 1. Prix MusiX précédent, 2. Prix catalogue recommandé