DPA 4017 Shotgun
Shotgun Microphone
EUR 1911.15
Incl. VAT, free shipping
Product # | 138902 |
Brand | DPA![]() |
Category | Reporter & Shotgun Microphones | Brand Category | DPA - Shotgun Microphones |
Series | DPA d:dicate |
Release date | January 2010 |
Availability | ![]() |
This page contains auto-translated text
Description
The DPA 4017 is an extremely compact and extremely light shotgun microphone that combines high directivity with typical DPA signal clarity. It is suitable for a wide range of tasks such as use with camera systems, for permanent installations in sports facilities or in conjunction with microphone booms in the areas of broadcast and film. The 4017 is the state-of-the-art shotgun microphone with smooth off-axis sound and wide dynamic range. At the same time, it suppresses unwanted ambient noise in a unique way. At just 210 mm long and weighing 71 grams, the 4017 is one of the lightest and shortest shotgun microphones on the market. During development, the main focus was on optimizing the transmission of sound incident from the sides and rear. Minimizing the normally very non-linear response of a shotgun microphone was the top priority in the specifications. The capacitor capsule works with a "backplate" pre-polarized by high voltage and gives the 4017 a very high output level with extremely low noise and minimal distortion. The DPA 4017 has two switchable filters, which are designed as "switching rings" in a completely new design: a high boost with +4dB at 8 kHz and a first-order bass roll-off filter in the range below 300 Hz. A third-order permanent high-pass filter at 50 Hz suppresses unwanted, low-frequency handling and wind noise. Thanks to its remarkable clarity, large dynamic range and excellent directivity, the DPA 4017 is equally suitable for use in the studio as well as for recording live music
Attributes
Product Details
|
Properties
irectional characteristics: Supercardioid, lobe-shaped
Principle of operation: Pressure gradient, supercardioid with interference tube
Cartridge type: 19 mm (0.75 in) pre-polarized condenser
Frequency range, ± 2 dB: 70 Hz - 20 kHz, permanent third order high pass filter at 50 Hz
Sensitivity, nominal, ±2 dB: 30 mV/Pa; -30 dB right. 1V/Pa
Equivalent noise level A-weighted: Typ. 14 dB(A) (max. 15 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 25 dB(A) (max. 26 dB(A))
S/N ratio, right. 1 kHz at 1 Pa (94 dB SPL): 80 dB(A)
Total harmonic distortion (THD): <0.5% up to 130 dB SPL peak, <1% up to 131 dB SPL peak
Dynamic range: Type. 117dB
Max. SPL, peak before clipping: 132 dB
Output impedance: <200 ohms
Cable drive capability: Up to 100 m (328 ft)
Power supply: 48V Phantom power
Current consumption: 4.5 mA (48 V phantom)
Connector: XLR-3M, Pin 1: Shield, Pin 2: Signal + phase, Pin 3: Signal - phase
Color: Matte black
Weight: 71g (2.5oz)
Length: 210mm (8.3in)
Principle of operation: Pressure gradient, supercardioid with interference tube
Cartridge type: 19 mm (0.75 in) pre-polarized condenser
Frequency range, ± 2 dB: 70 Hz - 20 kHz, permanent third order high pass filter at 50 Hz
Sensitivity, nominal, ±2 dB: 30 mV/Pa; -30 dB right. 1V/Pa
Equivalent noise level A-weighted: Typ. 14 dB(A) (max. 15 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 25 dB(A) (max. 26 dB(A))
S/N ratio, right. 1 kHz at 1 Pa (94 dB SPL): 80 dB(A)
Total harmonic distortion (THD): <0.5% up to 130 dB SPL peak, <1% up to 131 dB SPL peak
Dynamic range: Type. 117dB
Max. SPL, peak before clipping: 132 dB
Output impedance: <200 ohms
Cable drive capability: Up to 100 m (328 ft)
Power supply: 48V Phantom power
Current consumption: 4.5 mA (48 V phantom)
Connector: XLR-3M, Pin 1: Shield, Pin 2: Signal + phase, Pin 3: Signal - phase
Color: Matte black
Weight: 71g (2.5oz)
Length: 210mm (8.3in)
Documents (1)
Brand
Report incorrect data about this product